25 open source boards using the W25Q128
Real designs built with the W25Q128, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
EsPiFF
MDCservice
83.5 × 56 mm168 parts6LGPL-3.0224ESP8266
ZXUNO.1010
UzixLS
100 × 100 mm215 parts2LMIT23RP2040/RP2350
RP2350B-Dev-Board
jvanderberg
77 × 20.8 mm99 parts4LNo license23STM32
Vectrex cart
rattboi
48 × 65.5 mm47 parts2LGPL-3.015RP2040/RP2350
Tfr9
strickyak
82.8 × 62.8 mm106 parts4LMIT12RP2040/RP2350
Centipede-32d
strickyak
97.6 × 96 mm118 parts4LMIT5RP2040/RP2350
Centipede-32d
strickyak
97.6 × 96 mm118 parts4LMIT4Prj supercon2019
TomKeddie
64.8 × 68.3 mm21 parts2LNo license3STM32
ICEBrainstorm
jdekanter077
80 × 70 mm103 parts4LGPL-3.02RP2040/RP2350
Plank
thomas-maurice
229.8 × 77.9 mm146 parts2LNo license1STM32
VEXTREME-VXCOOP
jonskiv
48 × 66.1 mm47 parts2LGPL-3.01STM32
ModuCard mms extension pdw board
X-Lemon-X
100 × 100 mm136 parts4LNo license0ESP32
Hat board
Phil-CIA
73.2 × 99.9 mm79 parts2LNo license0STM32
Magrat v0
WRansohoff
64.1 × 72.4 mm78 parts4LMIT0- schematic only · 18 parts
Enhanced edr
kartiknagare33
18 partsMIT0 RP2040/RP2350
Centipede-32e
strickyak
97.6 × 96 mm118 parts4LMIT5RP2040/RP2350
Centipede-32z
strickyak
97.6 × 96 mm118 parts4LMIT4STM32
DSP-Regulator-HAT-RevB
Phil-CIA
100 × 102.6 mm158 parts2LNo license0RP2040/RP2350
Centipede-32z
strickyak
97.6 × 96 mm118 parts4LMIT5- schematic only · 81 partsRP2040/RP2350
Node v7 0 0
VTC-WISDOM
81 parts6LCERN-OHL-W-2.02 ESP32
DSP-Regulator-HAT-RevC
Phil-CIA
100 × 102.6 mm158 parts2LNo license0ESP32
DSP Regulator hat
Phil-CIA
100 × 100 mm130 parts2LNo license0ESP32
Hat board
Phil-CIA
73.2 × 99.9 mm79 parts2LNo license0RP2040/RP2350
Backup
ItsShadowCone
125.5 × 116.7 mm122 parts2LNo license0RP2040/RP2350
Transparent one
ItsShadowCone
275 × 200 mm79 parts2LNo license0
How designs wire the W25Q128
Read from the KiCad layouts of 17 open source designs, one per repository: what each pin of the W25Q128 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 12 of 17 designs, most often 100 nF (then 100 µF).
- The CS# pin has a series resistor on 7 of 17 designs, most often 1 kΩ (then 0 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| CS#pin 1 | Connected to: The microcontroller 59%, a connector 29% |
|
| GNDpin 4 | Connected to: GND 94% | — |
| VCCpin 8 | Connected to: 3.3V 100% |
|
5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include EsPiFF by MDCservice, RP2350B-Dev-Board by jvanderberg, ZXUNO.1010 by UzixLS and Vectrex cart by rattboi.
The W25Q128 in open source designs
The gallery holds 25 open source boards using the W25Q128 from 19 GitHub repositories; a typical one measures about 97.6 × 96 mm and carries around 118 components.
50% are two-layer designs, the rest use four layers or more, and 56% carry an open source license.
The most starred is EsPiFF by MDCservice.
Parts used alongside the W25Q128
Microcontrollers on boards using the W25Q128
What boards using the W25Q128 are built for
W25Q128: common questions
Where can I find a W25Q128 reference design?
Each of the 25 boards on this page is a real design using the W25Q128. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the W25Q128 VCC pin?
The VCC pin has a decoupling capacitor on 12 of 17 designs, most often 100 nF (then 100 µF). Counted from the KiCad layouts of 17 open source designs using the W25Q128.
What resistor goes on the W25Q128 CS# pin?
The CS# pin has a series resistor on 7 of 17 designs, most often 1 kΩ (then 0 Ω). Counted from the KiCad layouts of 17 open source designs using the W25Q128.
What parts are used alongside the W25Q128?
The 74HC595D, C427602, HC-1.0-3PWT, RP2350B and 74HC32 appear in the most repositories here.
Which microcontrollers do boards using the W25Q128 use?
Most are built on RP2040/RP2350 (11), STM32 (6), ESP32 (5) and ESP8266 (1).
How big is a typical board using the W25Q128?
The median is 97.6 × 96 mm, and 50% are two-layer designs.
What is the most popular open source board using the W25Q128?
By GitHub stars, EsPiFF by MDCservice, with 224 stars.
Can I simulate one of these boards using the W25Q128 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.