STEAMGal Firmware test
WRansohoff·STEAMGal_Firmware_test·board_design_v0/STEAMGal_STM32F051x/STEAMGal_STM32F051Kx.kicad_pcb
About the STEAMGal Firmware test PCB
STEAMGal Firmware test is an open source STM32 PCB design by WRansohoff, published on GitHub under the MIT license. It is a 2-layer board measuring 54 × 85.7 mm, with 63 components from 43 distinct parts.
Its main chip is the STM32F051K8, from the STM32 family. Other key parts include the AP2210. By type, the board carries 22 capacitors, 15 resistors, 9 switches, 8 connectors, 4 diodes and 2 ICs.
It belongs with the displays & leds designs in this gallery.
From the project
Repository for some simple test firmware for an educational ARM Cortex-M board I'm designing, inspired by the 'Arduboy' project.
This is some basic firmware for a board inspired by the 'Arduboy' project. I'm aiming for the same 'credit card' form-factor, but I've made a few tweaks to make this a potential platform for education about a wider variety of topics. I would like to emulate games written for the Arduboy project, but I'd also like to make the platform viable for other topics by breaking out the various unused pins. Ideally, people will be able to use this as both a standalone game platform and a general development board for interfacing with sensors, other forms of input/output, etc. I call it the 'STEAMGal'…

Main components on the STEAMGal Firmware test
STEAMGal Firmware test bill of materials (BOM)
63 components, 43 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F051K8 | LQFP-32_7x7mm_Pitch0.8mm_HandSoldering | U1 |
| 1 | AP2210 | SOT-23_Handsoldering | U2 |
| 1 | ULED_NPN | SOT-23_Handsoldering | Q1 |
| 1 | PZ_NPN | SOT-23_Handsoldering | Q2 |
| 1 | HSE | XTAL_HF_2SMD_1 | Y1 |
| 1 | Power_In | Pin_Header_Angled_1x02 | P1 |
| 1 | Prog | Pin_Header_Angled_1x04 | P2 |
| 1 | SSD1306_ribbon | SSD1306_Raw | P3 |
| 1 | GPIO1 | Pin_Header_Straight_1x05 | P4 |
| 1 | GPIO2 | Pin_Header_Straight_1x06 | P5 |
| 1 | JSTIO2 | JST_PH_2.0-4 | P6 |
| 1 | I2C_Bus | Pin_Header_Straight_1x04 | P7 |
| 1 | JSTIO1 | JST_PH_2.0-4 | P8 |
| 1 | PIEZO | Piezo_Buzzer_Mini | S1 |
| 1 | On? | SPDT_Slide_SMD_RA | SW1 |
| 1 | Reset | Button_SMD_2L_3x6x2.5mm | SW2 |
| 1 | Left | Button_SMD_2L_3x6x2.5mm | SW3 |
| 1 | Up | Button_SMD_2L_3x6x2.5mm | SW4 |
| 1 | Down | Button_SMD_2L_3x6x2.5mm | SW5 |
| 1 | Right | Button_SMD_2L_3x6x2.5mm | SW6 |
Show 23 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | A | Button_SMD_2L_3x6x2.5mm | SW7 |
| 1 | B | Button_SMD_2L_3x6x2.5mm | SW8 |
| 1 | <0.5Vf | SOD-123 | D1 |
| 1 | On? | LED_0805 | D2 |
| 1 | ESD | SOD-123 | D3 |
| 1 | User_LED | LED_0805 | D4 |
| 1 | 10u | TantalC_SizeA_EIA-3216_HandSoldering | C1 |
| 3 | 4.7u | C_0805_HandSoldering | C2, C14, C15 |
| 2 | 20p | C_0603_HandSoldering | C3, C4 |
| 3 | 100n | C_0805_HandSoldering | C5, C8, C9 |
| 7 | 10n | C_0805_HandSoldering | C6, C17, C18, C19, C20, C21, C22 |
| 3 | 1u | C_0805_HandSoldering | C7, C12, C13 |
| 1 | Pump2 | C_0805_HandSoldering | C10 |
| 1 | Pump1 | C_0805_HandSoldering | C11 |
| 1 | 2.2u | C_0805_HandSoldering | C16 |
| 1 | RLED | R_0805_HandSoldering | R1 |
| 2 | 4K7 | R_0805_HandSoldering | R2, R3 |
| 1 | IREF | R_0805_HandSoldering | R4 |
| 2 | I2C_PU | R_0805_HandSoldering | R5, R6 |
| 1 | RB_UL | R_0805_HandSoldering | R7 |
| 1 | ULEDR | R_0805_HandSoldering | R8 |
| 1 | RB_Pz | R_0805_HandSoldering | R9 |
| 6 | DB | R_0805_HandSoldering | R10, R11, R12, R13, R14, R15 |
STEAMGal Firmware test design files
The KiCad project lives in the WRansohoff/STEAMGal_Firmware_test repository on GitHub; these links point at the commit this page was built from.
STEAMGal Firmware test: common questions
What microcontroller does the STEAMGal Firmware test use?
The STEAMGal Firmware test is built around the STM32F051K8, from the STM32 family.
How big is the STEAMGal Firmware test PCB?
The STEAMGal Firmware test measures 54 × 85.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the STEAMGal Firmware test?
63 components, from 43 distinct parts. The full bill of materials is listed on this page.
Where can I download the STEAMGal Firmware test design files?
From the WRansohoff/STEAMGal_Firmware_test repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the STEAMGal Firmware test design in my own project?
Yes, under the terms of its MIT license, which WRansohoff chose for the repository.
Can I test firmware for the STEAMGal Firmware test without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k