4 open source boards using the AP2210

Real designs built with the AP2210, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The AP2210 in open source designs

The gallery holds 4 open source boards using the AP2210 from 4 GitHub repositories; a typical one measures about 54 × 85.7 mm and carries around 63 components.

75% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.

The most starred is Mainboard by matgla.

Parts used alongside the AP2210

Microcontrollers on boards using the AP2210

What boards using the AP2210 are built for

AP2210: common questions

Where can I find a AP2210 reference design?

Each of the 4 boards on this page is a real design using the AP2210. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the AP2210 use?

Most are built on STM32 (3) and RP2040/RP2350 (1).

How big is a typical board using the AP2210?

The median is 54 × 85.7 mm, and 75% are two-layer designs.

What is the most popular open source board using the AP2210?

By GitHub stars, Mainboard by matgla, with 10 stars.

Can I simulate one of these boards using the AP2210 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part