ReflowOvenController

wrickert·ReflowOvenController·Schematics/Reflow.kicad_pcb

ReflowOvenController PCB layout, top view — open source STM32 board by wrickert

About the ReflowOvenController PCB

ReflowOvenController is an open source STM32 PCB design by wrickert, published on GitHub. It is a 2-layer board measuring 64.4 × 196.7 mm, with 48 components from 26 distinct parts.

Its main chip is the STM32F411RETx, from the STM32 family. Other key parts include the MCP9600 and TLV1117-33. By type, the board carries 12 capacitors, 10 connectors, 8 resistors, 7 switches, 5 diodes and 3 ICs.

From the project

Reflow controller for the Panasonic NB-W250S Toaster Oven.

USE AT YOUR OWN RISK I have used this code but there are still potentially bugs that if left unmonitored could cause a fire.

Main components on the ReflowOvenController

ReflowOvenController bill of materials (BOM)

48 components, 26 distinct parts.

QtyPartRefs
1
MCP9600
U1
1
STM32F411RETx
U2
1
TLV1117-33
U3
1
8MHz
Y1
1
32.768kHz
Y2
1
100nF
CN1
1
USB_C_Receptacle
J1
1
Conn_01x02
J2
1
Conn_01x10
J3
1
Conn_01x12
J4
2
Conn_01x04
J5, J9
1
Prog
J6
1
BreadboardPwr
J7
1
Conn_01x03
J8
6
SW_Push
SW1, SW2, SW4, SW5, SW6, SW8
1
Rotary_Encoder
SW7
5
LED
D1, D2, D3, D4, D5
1
L_Small
L1
3
100nF
C1, C3, C5
3
1uF
C2, C11, C12
Show 6 more
QtyPartRefs
2
4.7uF
C4, C6
2
20pF
C7, C8
2
1.5pF
C9, C10
4
0
R1, R2, R3, R4
1
1k
RN1
3
R_Pack04
RN2, RN3, RN4

ReflowOvenController design files

The KiCad project lives in the wrickert/ReflowOvenController repository on GitHub; these links point at the commit this page was built from.

ReflowOvenController: common questions

What microcontroller does the ReflowOvenController use?

The ReflowOvenController is built around the STM32F411RETx, from the STM32 family.

How big is the ReflowOvenController PCB?

The ReflowOvenController measures 64.4 × 196.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ReflowOvenController?

48 components, from 26 distinct parts. The full bill of materials is listed on this page.

Where can I download the ReflowOvenController design files?

From the wrickert/ReflowOvenController repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the ReflowOvenController design in my own project?

The repository has no license, so all rights stay with wrickert. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the ReflowOvenController without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards