14 open source boards using the STM32F411RETx
Real designs built with the STM32F411RETx, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM3253xLIDAR
valerionew
75.4 × 75.4 mm57 parts2LNo license11
ESP8266Flight controller v2
Eryk-Mozdzen
45 × 89 mm108 parts4LNo license9
STM32CPU Board
jsjolund
100 × 70 mm112 parts2LNo license3
STM32PCB Simon mount rev2
HTheolin
80.5 × 53.8 mm60 parts2LNo license3
STM32Ittypda
ingobeans
105 × 107.2 mm152 parts2LNo license1
STM32Gamingmouse v2
kottz
50 × 80 mm69 parts2LNo license1
STM32PCB Simon
78.7 × 45.7 mm56 parts2LNo license3
STM32Lab1
50 × 80 mm69 parts2LNo license1
STM32Midi-2-cv
lennartquerter
50 × 110 mm142 parts4LCC-BY-NC-4.010
STM32Esc sigma-4s
mstoilov
27 × 52 mm121 parts4LNo license5
STM32Lab
40 × 40 mm27 parts2LNo license3
STM32Esc sigma-4s panel
77 × 127 mm121 parts4LNo license5
STM32Lab1
40 × 40 mm25 parts2LNo license3
STM32Lab1
54.5 × 31 mm25 parts2LNo license26
The STM32F411RETx in open source designs
The gallery holds 14 open source boards using the STM32F411RETx from 9 GitHub repositories; a typical one measures about 52.3 × 72.7 mm and carries around 69 components.
71% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Lab1 by jsjolund.
What boards using the STM32F411RETx are built for
STM32F411RETx: common questions
Where can I find a STM32F411RETx reference design?
Each of the 14 boards on this page is a real design using the STM32F411RETx. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the STM32F411RETx use?
Most are built on STM32 (13) and ESP8266 (1).
How big is a typical board using the STM32F411RETx?
The median is 52.3 × 72.7 mm, and 71% are two-layer designs.
What is the most popular open source board using the STM32F411RETx?
By GitHub stars, Lab1 by jsjolund, with 26 stars.
Can I simulate one of these boards using the STM32F411RETx before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.