Integrator Array
About the Integrator Array PCB
Integrator Array is an open source PCB design by wrochira, published on GitHub under the CC-BY-NC-4.0 license. It is a 4-layer board measuring 42.3 × 128.8 mm, with 97 components from 7 distinct parts.
Other key parts include the 74HC4051 and TL072. By type, the board carries 36 capacitors, 36 resistors, 24 ICs and 1 connector.
From the project
A dual-board hybrid analog–digital computing prototype using op-amp integrators and a Raspberry Pi Pico controller.
This project is a proof-of-concept hybrid computing system built from two PCBs: an integrator array board with 18 analog op-amp integrators, and a controller board built around a Raspberry Pi Pico, high‑precision ADC/DACs, and multiplexers. The intent is to represent three particles in 3D space (acceleration → velocity → position per dimension), with the Pico reading integrator outputs, computing forces, and writing updated accelerations back into the analog system.
Main components on the Integrator Array
Integrator Array bill of materials (BOM)
97 components, 7 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 6 | 74HC4051 | SOIC-16_3.9x9.9mm_P1.27mm | U1, U2, U9, U10, U17, U18 |
| 18 | TL072 | SOT-23-8 | U3, U4, U5, U6, U7, U8, U11, U12 +10 |
| 1 | CONN_01X14_PIN Conn_01x14_Pin | PinHeader_1x14_P2.54mm_Horizontal | J1 |
| 18 | 10P 10p | C_0603_1608Metric | C1, C3, C5, C7, C9, C11, C13, C15 +10 |
| 18 | 1n | C_0603_1608Metric | C2, C4, C6, C8, C10, C12, C14, C16 +10 |
| 18 | 1k | R_0805_2012Metric | R1, R3, R5, R7, R9, R11, R13, R15 +10 |
| 18 | 100K 100k | R_0805_2012Metric | R2, R4, R6, R8, R10, R12, R14, R16 +10 |
Integrator Array design files
The KiCad project lives in the wrochira/hybrid-integrator-array repository on GitHub; these links point at the commit this page was built from.
Integrator Array: common questions
How big is the Integrator Array PCB?
The Integrator Array measures 42.3 × 128.8 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Integrator Array?
97 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Integrator Array design files?
From the wrochira/hybrid-integrator-array repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Integrator Array design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.
