65 open source boards using the 74HC4051

Real designs built with the 74HC4051, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

65 boardsClear filters|Most starred

How designs wire the 74HC4051

Read from the KiCad layouts of 45 open source designs, one per repository: what each pin of the 74HC4051 connects to, and the resistors, capacitors and other passives placed on it.

  • The VEE pin is tied to GND on 37 of 44 designs (-5V on 3, a signal on 4).
  • The VCC pin has a decoupling capacitor on 26 of 44 designs, most often 100 nF (then 1 µF).
  • The A1 pin has a resistor to GND on 18 of 44 designs, most often 100 kΩ (then 1 kΩ).
A4pin 1Connected to: A connector 27%
  • Resistor to GND on 36% · 100 kΩ (13), 1 kΩ (2), 1.8 kΩ (1)
Apin 3Connected to: The microcontroller 40%, 74HC4051 22%
  • Capacitor to GND on 36% · 220 pF (14), 1 nF (1), 240 pF (1)
VEEpin 7Connected to: GND 84%
GNDpin 8Connected to: GND 95%
A3pin 12Connected to: A connector 25%
  • Resistor to GND on 39% · 100 kΩ (14), 1 kΩ (2), 1.8 kΩ (1)
A0pin 13Connected to: A connector 27%
  • Resistor to GND on 39% · 100 kΩ (14), 1 kΩ (2), 1.8 kΩ (1)
A1pin 14Connected to: A connector 30%
  • Resistor to GND on 41% · 100 kΩ (15), 1 kΩ (2), 1.8 kΩ (1)
A2pin 15Connected to: A connector 27%
  • Resistor to GND on 39% · 100 kΩ (14), 1 kΩ (2), 1.8 kΩ (1)
VCCpin 16Connected to: 3.3V 89%
  • Decoupling capacitor on 59% · 100 nF (30), 1 µF (2), 100 pF (1)

7 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Pslab hardware by fossasia, Brain core by shmoergh, Chiller control by eddyem and Tako by ssbb.

The 74HC4051 in open source designs

The gallery holds 65 open source boards using the 74HC4051 from 48 GitHub repositories; a typical one measures about 116 × 90.5 mm and carries around 80 components.

55% are two-layer designs, the rest use four layers or more, and 29% carry an open source license.

The most starred is Pslab hardware by fossasia.

Microcontrollers on boards using the 74HC4051

74HC4051: common questions

Where can I find a 74HC4051 reference design?

Each of the 65 boards on this page is a real design using the 74HC4051. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the 74HC4051 VEE pin connected?

The VEE pin is tied to GND on 37 of 44 designs (-5V on 3, a signal on 4). Counted from the KiCad layouts of 45 open source designs using the 74HC4051.

What decoupling capacitors do designs use on the 74HC4051 VCC pin?

The VCC pin has a decoupling capacitor on 26 of 44 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 45 open source designs using the 74HC4051.

What resistor goes on the 74HC4051 A1 pin?

The A1 pin has a resistor to GND on 18 of 44 designs, most often 100 kΩ (then 1 kΩ). Counted from the KiCad layouts of 45 open source designs using the 74HC4051.

What parts are used alongside the 74HC4051?

The OPA350, STM32F401CBUx, TL072, AMS1117-3.3 and OPA354 appear in the most repositories here.

Which microcontrollers do boards using the 74HC4051 use?

Most are built on STM32 (29), RP2040/RP2350 (4), AVR/Arduino (3) and NXP (2).

How big is a typical board using the 74HC4051?

The median is 116 × 90.5 mm, and 55% are two-layer designs.

What is the most popular open source board using the 74HC4051?

By GitHub stars, Pslab hardware by fossasia, with 1,700 stars.

Can I simulate one of these boards using the 74HC4051 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part