HardLabs

Tube offset-1

wyager·vumeter·schematics/tube-offset-1/tube-offset-1.kicad_pcb

Tube offset-1 PCB layout, top view — open source board by wyager

About the Tube offset-1 PCB

Tube offset-1 is an open source PCB design by wyager, published on GitHub under the MIT license. It is a 2-layer board measuring 100 × 10 mm, with 8 components from 3 distinct parts.

It belongs with the audio, displays & leds and usb & debug tools designs in this gallery.

From the project

A nixie tube audio meter

Go into code/audioboard and code/tubeboard and run cargo build --release. (Without --release, the binaries may be too large.)

Plug your AVR-ICE or similar JTAG programmer into the tube board via the programming header and run ./program.sh.

Plug in your teensy over USB, put it in programming mode, and run ./program.sh

Get KiCad and open the schematics. How to export the schematics depends on your choice of PCB manufacturer. They should have instructions available online.

Tube offset-1, from the project README
From the project README

Tube offset-1 bill of materials (BOM)

8 components, 3 distinct parts.

QtyPartRefs
2
Conn_01x04_Male
J1, J4
2
Conn_01x04_Female
J2, J3
4
IN-13
N1, N2, N3, N4

Tube offset-1 design files

The KiCad project lives in the wyager/vumeter repository on GitHub; these links point at the commit this page was built from.

Tube offset-1: common questions

How big is the Tube offset-1 PCB?

The Tube offset-1 measures 100 × 10 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Tube offset-1?

8 components, from 3 distinct parts. The full bill of materials is listed on this page.

Where can I download the Tube offset-1 design files?

From the wyager/vumeter repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Tube offset-1 design in my own project?

Yes, under the terms of its MIT license, which wyager chose for the repository.

More boards in vumeter

Similar boards