Metronome
Xerces-04·Metronome·KiCAD/Metronome.kicad_pcb
About the Metronome PCB
Metronome is an open source AVR/Arduino PCB design by Xerces-04, published on GitHub. It is a 2-layer board measuring 90.5 × 85 mm, with 13 components from 10 distinct parts.
Its main chip is the Arduino_Nano_v3.x, from the AVR/Arduino family. Other key parts include the 5V Buck_Conv and TPA3110_AudioAmp. By type, the board carries 6 connectors, 3 ICs, 3 resistors and 1 module.
It belongs with the audio, power & battery and displays & leds designs in this gallery.
From the project
An end-to-end embedded hardware project featuring a custom PCB, parametric 3D-printed enclosure with heat-set inserts, real-time animation, and dedicated audio playback.
An end-to-end embedded hardware project featuring a custom PCB, parametric 3D-printed enclosure with heat-set inserts, real-time animation, and dedicated audio playback.
This project is a standalone digital metronome built from scratch. It bridges embedded software, custom PCB design, and mechanical engineering into a single polished consumer-style device.
- BPM Range: 40 – 300 BPM (Rotary encoder with detent mapping) - Audio Output: Real sample playback via DFPlayer Mini + dedicated audio amplifier - Visual Feedback: 128x64 OLED display showing live BPM, volume indicator, dynamic battery…

Main components on the Metronome
Metronome bill of materials (BOM)
13 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ | MODULE_DFR0299 | U1 |
| 1 | 5V Buck_Conv | 5V_BuckConv | U2 |
| 1 | TPA3110_AudioAmp | TPA3110_AudioAmp | U4 |
| 1 | Arduino_Nano_v3.x | Arduino_Nano | A1 |
| 3 | Conn_01x02_Pin | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J1, J2, J3 |
| 1 | Conn_01x04_Pin | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J4 |
| 1 | Conn_01x03_Pin | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J5 |
| 1 | Conn_01x05_Pin | JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J6 |
| 1 | 1k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 2 | 22k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2, R3 |
Metronome design files
The KiCad project lives in the Xerces-04/Metronome repository on GitHub; these links point at the commit this page was built from.
- LayoutKiCAD/Metronome.kicad_pcb
- SchematicKiCAD/Metronome.kicad_sch
Metronome: common questions
What microcontroller does the Metronome use?
The Metronome is built around the Arduino_Nano_v3.x, from the AVR/Arduino family.
How big is the Metronome PCB?
The Metronome measures 90.5 × 85 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Metronome?
13 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the Metronome design files?
From the Xerces-04/Metronome repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Metronome design in my own project?
The repository has no license, so all rights stay with Xerces-04. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Metronome without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k