Ai agent

Xin4813·ai_agent_pcb·examples/output/schematic/Arduino_最小系统板__ATmega328P_PU_.kicad_sch

This repository ships a schematic but no board layout.

About the Ai agent PCB

Ai agent is an open source AVR/Arduino PCB design by Xin4813, published on GitHub. It is a board, with 8 components from 7 distinct parts.

Its main chip is the ATmega328P-P, from the AVR/Arduino family. By type, the board carries 3 capacitors, 2 resistors, 1 IC, 1 crystal and 1 diode.

From the project

1. 需求解析:把"帮我设计一块 Arduino 最小系统板"这类句子,转成结构化 BOM。 2. 网表生成:基于 BOM 与电路知识,生成引脚级连接关系(netlist JSON),带自纠错校验循环。 3. 原理图生成:把网表自动绘制成 KiCad 8 原理图(.kicadsch),并内嵌符号库、可被 KiCad 直接打开。 4. ERC 校验:通过 kicad-cli sch erc 做电气规则检查,形成"生成—检查—修订"闭环。 5. 交互修订**:用自然语言指令(如"把电容换成 100nF")迭代修改设计。

Main components on the Ai agent

Ai agent bill of materials (BOM)

8 components, 7 distinct parts.

QtyPartRefs
1
ATmega328P-P
U1
1
16MHz
Y1
1
LED
D1
2
22pF
C1, C2
1
100nF
C3
1
10k
R1
1
330
R2

Ai agent design files

The KiCad project lives in the Xin4813/ai_agent_pcb repository on GitHub; these links point at the commit this page was built from.

Ai agent: common questions

What microcontroller does the Ai agent use?

The Ai agent is built around the ATmega328P-P, from the AVR/Arduino family.

How many components are on the Ai agent?

8 components, from 7 distinct parts. The full bill of materials is listed on this page.

Where can I download the Ai agent design files?

From the Xin4813/ai_agent_pcb repository on GitHub, which has the schematic; the links under Design files point to each one.

Can I use the Ai agent design in my own project?

The repository has no license, so all rights stay with Xin4813. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Ai agent without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards