Uprobe

xx0x·uprobe·pcb/uprobe-0.1/uprobe-0.1.kicad_pcb

Uprobe PCB layout, top view — open source STM32 board by xx0x

About the Uprobe PCB

Uprobe is an open source STM32 PCB design by xx0x, published on GitHub. It is a 4-layer board measuring 36 × 77 mm, with 101 components from 34 distinct parts.

Its main chip is the STM32F103CBUX, from the STM32 family. Other key parts include the ATMEGA8A-M, AMS1117-3.3, AP22653 and 74LVC2T45DC. By type, the board carries 34 capacitors, 34 resistors, 12 ICs, 7 connectors, 3 transistors and 2 crystals.

From the project

uconsole debug probe

Main components on the Uprobe

Uprobe bill of materials (BOM)

101 components, 34 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ATMEGA8A-M
ATmega8A-M
U1
1
AMS1117-3.3
U2
2
AP22653
U3, U4
1
STM32F103CBUX
STM32F103CBUx
U5
7
74LVC2T45DC
U6, U7, U8, U9, U10, U11, U12
1
BSS138
Q1
1
DMG1024UV
Q7
1
DMG1023UV
Q8
1
ABM8-12.000MHZ-B2-T
Y1
1
ABM8-8.000MHZ-B2-T
Y2
1
uConsoleEXT
J1
1
Conn_02x05_Odd_Even
J2
1
Conn_02x05_Odd_Even
J3
1
JST_SH_BM03B-SRSS
J4
1
Conn_01x02
J5
2
Conn_01x04
J7, J8
1
500MA
500mA
F1
4
XL-3210SURUGC
LD1, LD2, LD3, LD4
2
XUNPU TS-1088-AR02016
SW1, SW2
2
3V3
D2, D3
Show 14 more
QtyPartRefs
4
27P
27p
C1, C2, C19, C20
4
10U
10u
C3, C4, C6, C7
26
100N
100n
C5, C8, C9, C10, C11, C12, C13, C14 +18
7
10K
10k
R1, R8, R9, R31, R34, R35, R36
2
68
R2, R3
1
2K2
2k2
R4
3
1k
R5, R6, R25
2
210K
210k
R7, R10
5
270
R26, R43, R44, R45, R46
2
22
R27, R28
1
1K5
1k5
R29
3
4K7
4k7
R30, R32, R33
6
100
R37, R38, R39, R40, R41, R42
2
100
RN1, RN2

Uprobe design files

The KiCad project lives in the xx0x/uprobe repository on GitHub; these links point at the commit this page was built from.

Uprobe: common questions

What microcontroller does the Uprobe use?

The Uprobe is built around the STM32F103CBUX, from the STM32 family.

How big is the Uprobe PCB?

The Uprobe measures 36 × 77 mm, has 4 copper layers and is 1 mm thick.

How many components are on the Uprobe?

101 components, from 34 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Uprobe design files?

From the xx0x/uprobe repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Uprobe design in my own project?

The repository has no license, so all rights stay with xx0x. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Uprobe without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards