25 open source boards using the 74LVC2T45DC

Real designs built with the 74LVC2T45DC, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

25 boardsClear filters|Most starred

How designs wire the 74LVC2T45DC

Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the 74LVC2T45DC connects to, and the resistors, capacitors and other passives placed on it.

  • The VCCA pin has a decoupling capacitor on 10 of 14 designs, most often 100 nF (then 3.3 µF).
  • The VCCB pin has a decoupling capacitor on 9 of 14 designs, most often 100 nF (then 3.3 µF).
VCCApin 1Connected to: 3.3V 93%
  • Decoupling capacitor on 71% · 100 nF (14), 3.3 µF (2), 2.2 µF (1)
GNDpin 4Connected to: GND 93%
DIRpin 5Connected to: GND 57% · 3.3V 36%
  • Capacitor to GND on 36% · 100 nF (4), 2.2 µF (1)
2Bpin 6Connected to: A connector 36%
  • Series resistor on 36% · 100 Ω (2), 470 Ω (1), 10 Ω (1)
VCCBpin 8Connected to: 3.3V 71% · a signal 29%
  • Decoupling capacitor on 64% · 100 nF (17), 3.3 µF (2), 10 µF (1)

3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include RailLink by Misaka0x2730, PregnantLaserMouse by Board-Folk, MCU-Link-MR by ErichStyger and Meowality by gatecat.

The 74LVC2T45DC in open source designs

The gallery holds 25 open source boards using the 74LVC2T45DC from 15 GitHub repositories; a typical one measures about 72.7 × 58.1 mm and carries around 62 components.

60% are two-layer designs, the rest use four layers or more, and 72% carry an open source license.

The most starred is RailLink by Misaka0x2730.

Parts used alongside the 74LVC2T45DC

Microcontrollers on boards using the 74LVC2T45DC

74LVC2T45DC: common questions

Where can I find a 74LVC2T45DC reference design?

Each of the 25 boards on this page is a real design using the 74LVC2T45DC. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the 74LVC2T45DC VCCA pin?

The VCCA pin has a decoupling capacitor on 10 of 14 designs, most often 100 nF (then 3.3 µF). Counted from the KiCad layouts of 14 open source designs using the 74LVC2T45DC.

What decoupling capacitors do designs use on the 74LVC2T45DC VCCB pin?

The VCCB pin has a decoupling capacitor on 9 of 14 designs, most often 100 nF (then 3.3 µF). Counted from the KiCad layouts of 14 open source designs using the 74LVC2T45DC.

What parts are used alongside the 74LVC2T45DC?

The AMS1117-3.3, 74AHC1G08, MMC5983MA and USBLC6-2SC6 appear in the most repositories here.

Which microcontrollers do boards using the 74LVC2T45DC use?

Most are built on STM32 (7), ESP32 (6), Raspberry Pi (2) and RP2040/RP2350 (1).

How big is a typical board using the 74LVC2T45DC?

The median is 72.7 × 58.1 mm, and 60% are two-layer designs.

What is the most popular open source board using the 74LVC2T45DC?

By GitHub stars, RailLink by Misaka0x2730, with 133 stars.

Can I simulate one of these boards using the 74LVC2T45DC before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part