5 open source boards using the STM32F103CBUx

Real designs built with the STM32F103CBUx, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the STM32F103CBUx

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the STM32F103CBUx connects to, and the resistors, capacitors and other passives placed on it.

  • The VBAT pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 1 µF).
  • The PD0 pin has a crystal on 5 of 5 designs, most often 8 MHz.
  • The PD1 pin has a crystal on 5 of 5 designs, most often 8 MHz.
  • The NRST pin has a capacitor to GND on 5 of 5 designs, most often 100 nF (then 1 µF).
VBATpin 1Connected to: 3.3V 80% · a signal 20%
  • Decoupling capacitor on 100% · 100 nF (12), 1 µF (2), 4.7 µF (1)
PC13pin 2Connected to: Not connected 60% · a signal 40%
PC14pin 3Connected to: Not connected 80% · a signal 20%
PC15pin 4Connected to: Not connected 80% · a signal 20%
PD0pin 5Connected to: Signal 100%
  • Crystal on 100% · 8 MHz (5)
  • Capacitor to GND on 40% · 24 pF (1), 27 pF (1)
PD1pin 6Connected to: Signal 100%
  • Crystal on 100% · 8 MHz (5)
  • Capacitor to GND on 40% · 24 pF (1), 27 pF (1)
NRSTpin 7Connected to: A connector 80%
  • Capacitor to GND on 100% · 100 nF (4), 1 µF (1)
VSSApin 8Connected to: GND 100%
VDDApin 9Connected to: 3.3V 80% · a signal 20%
  • Decoupling capacitor on 100% · 100 nF (10), 1 µF (2)
PA0pin 10Connected to: Not connected 80% · a signal 20%
PB0pin 18Connected to: Signal 100%
  • Resistor to GND on 60% · 10 kΩ (3)
  • Capacitor to GND on 60% · 100 nF (3)
  • Series resistor on 60% · 4.7 kΩ (3)
PB1pin 19Connected to: Signal 100%
  • Series resistor on 60% · 10 kΩ (3)
PB2pin 20Connected to: Signal 100%
  • Series resistor on 60% · 330 Ω (1), 10 kΩ (1), 270 Ω (1)
PB10pin 21Connected to: Signal 100%
  • Series resistor on 80% · 270 Ω (2), 330 Ω (1), 1 kΩ (1)
PB11pin 22Connected to: Signal 100%
  • Series resistor on 60% · 330 Ω (1), 4.7 kΩ (1), 270 Ω (1)
VSSpin 23, 35, 47, 49Connected to: GND 100%
VDDpin 24, 36, 48Connected to: 3.3V 80% · a signal 20%
  • Decoupling capacitor on 100% · 100 nF (30), 4.7 µF (2), 1 µF (1)
PB12pin 25Connected to: Signal 100%
  • Pull-up to 3.3V on 60% · 10 kΩ (2), 4.7 kΩ (1)
PB13pin 26Connected to: VBUS 60% · not connected 20% · a signal 20%
PB14pin 27Connected to: Not connected 80% · a signal 20%
PB15pin 28Connected to: Not connected 60% · a signal 40%
PA8pin 29Connected to: Signal 80% · not connected 20%
  • Series resistor on 60% · 1.5 kΩ (3)
PA11pin 32Connected to: Signal 80% · not connected 20%
  • Series resistor on 80% · 22 Ω (3), 10 Ω (1)
PA12pin 33Connected to: Signal 80% · not connected 20%
  • Series resistor on 80% · 22 Ω (3), 1.5 kΩ (1), 10 Ω (1)
PA15pin 38Connected to: Not connected 80% · a signal 20%
PB4pin 40Connected to: 3.3V 60% · not connected 20% · a signal 20%
PB5pin 41Connected to: 3.3V 60% · a signal 40%
PB6pin 42Connected to: 3.3V 60% · a signal 40%
BOOT0pin 44Connected to: GND 60% · a signal 40%
  • Resistor to GND on 40% · 10 kΩ (1), 100 kΩ (1)
PB8pin 45Connected to: Not connected 100%
PB9pin 46Connected to: Not connected 60% · a signal 40%

13 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Blackmagic bmp22-clone by sergiomd4, 24RF Remote Control by Yongxin-Lu, TP-BMP by zakqwy and Bluetooth and-Mioty-Localization-Hardware by Chandubreddy819.

The STM32F103CBUx in open source designs

The gallery holds 5 open source boards using the STM32F103CBUx from 5 GitHub repositories; a typical one measures about 36 × 40.1 mm and carries around 65 components.

80% use four copper layers or more, and 40% carry an open source license.

The most starred is Blackmagic bmp22-clone by sergiomd4.

Microcontrollers on boards using the STM32F103CBUx

What boards using the STM32F103CBUx are built for

STM32F103CBUx: common questions

Where can I find a STM32F103CBUx reference design?

Each of the 5 boards on this page is a real design using the STM32F103CBUx. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the STM32F103CBUx VBAT pin?

The VBAT pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the STM32F103CBUx.

How is the STM32F103CBUx PD0 pin connected?

The PD0 pin has a crystal on 5 of 5 designs, most often 8 MHz. Counted from the KiCad layouts of 5 open source designs using the STM32F103CBUx.

How is the STM32F103CBUx PD1 pin connected?

The PD1 pin has a crystal on 5 of 5 designs, most often 8 MHz. Counted from the KiCad layouts of 5 open source designs using the STM32F103CBUx.

Which microcontrollers do boards using the STM32F103CBUx use?

Most are built on STM32 (5).

How big is a typical board using the STM32F103CBUx?

The median is 36 × 40.1 mm, and 20% are two-layer designs.

What is the most popular open source board using the STM32F103CBUx?

By GitHub stars, Blackmagic bmp22-clone by sergiomd4, with 4 stars.

Can I simulate one of these boards using the STM32F103CBUx before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part