DotMatrix

Yanisin·DotMatrix·pcb/38x38_dma/bcl4v3.kicad_pcb

DotMatrix PCB layout, top view — open source STM32 board by Yanisin

About the DotMatrix PCB

DotMatrix is an open source STM32 PCB design by Yanisin, published on GitHub under the CERN-OHL-1.2 license. It is a 2-layer board measuring 38 × 38 mm, with 29 components from 20 distinct parts.

Its main chip is the MIC2091-1YM5, from the STM32 family. Other key parts include the STM32F070CBTX, 74HC595, TLC5916ID and TLC5916. By type, the board carries 10 connectors, 6 capacitors, 5 ICs, 3 resistors, 1 transistor and 1 jumper.

From the project

You need an appropriate Cortex-M ARM toolchain. We suggest to use the ARM's GNU Embedded Toolchain for Arm . Please note that the gcc-arm-none-eabi` provided by Ubuntu 18.04 is currently broken and can't be used.

You need an appropriate Cortex-M ARM toolchain. We suggest to use the ARM's GNU Embedded Toolchain for Arm . Please note that the gcc-arm-none-eabi` provided by Ubuntu 18.04 is currently broken and can't be used.

This project makes use of libopencm3https://github.com/libopencm3/libopencm3) and ChibiOS. In order to build libopencm3 you need Python 2`.

To download the firmware, you have two options: - Via USB: You need dfu-util 0.9+ and a USB cable. Please not that dfu-util 0.8 will not work. - Via SWD: You need openocd and a ST-LINK v2 device`

Main components on the DotMatrix

DotMatrix bill of materials (BOM)

29 components, 20 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MIC2091-1YM5
STM32F072CBTx
U1
1
STM32F070CBTX
74HC595D_118
U2
1
74HC595
TBD62783A
U3
1
TLC5916ID
U4
1
TLC5916
MCP1703A-3302_SOT23
U5
1
BSS138
IRLML6402
Q1
7
CONN_01X05
Conn_01x04
J1, J2, J4, J5, J6, J7, J8
2
Conn_01x04
J3, J10
1
CONN_01X05
10118194-0001LF
J9
1
Jumper_2_Open
BOOT0
1
LDM-1588BS
DS1
1
Jumper
JP1
1
LED
D1
1
4U7
4.7u
C3
1
100N
4.7u
C4
1
100n
C5
3
100N
100n
C6, C7, C8
1
10K
1k
R1
1
220K
1k
R2
1
10K
680R
R4

DotMatrix design files

The KiCad project lives in the Yanisin/DotMatrix repository on GitHub; these links point at the commit this page was built from.

DotMatrix: common questions

What microcontroller does the DotMatrix use?

The DotMatrix is built around the MIC2091-1YM5, from the STM32 family.

How big is the DotMatrix PCB?

The DotMatrix measures 38 × 38 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the DotMatrix?

29 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the DotMatrix design files?

From the Yanisin/DotMatrix repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the DotMatrix design in my own project?

Yes, under the terms of its CERN-OHL-1.2 license, which Yanisin chose for the repository.

Can I test firmware for the DotMatrix without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Earlier revisions in the repo: bcl4v2

Similar boards