7 open source boards using the STM32F070CBTx

Real designs built with the STM32F070CBTx, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the STM32F070CBTx

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the STM32F070CBTx connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD pins have a decoupling capacitor on 6 of 7 designs, most often 100 nF (then 1 µF).
  • The VDDA pin has a decoupling capacitor on 6 of 7 designs, most often 100 nF (then 1 µF).
  • The PC14 pin is left unconnected on 6 of 7 designs.
  • The RCC_OSC_IN pin has a crystal on 5 of 7 designs, most often 8 MHz.
VDDpin 1, 24, 36, 48Connected to: 3.3V 96%
  • Decoupling capacitor on 86% · 100 nF (31), 1 µF (6), 22 µF (2)
PC13pin 2Connected to: Not connected 71% · a signal 29%
PC14pin 3Connected to: Not connected 86%
PC15pin 4Connected to: Not connected 71% · a signal 29%
RCC_OSC_INpin 5Connected to: Signal 86%
  • Crystal on 71% · 8 MHz (3)
  • Capacitor to GND on 57% · 18 pF (2), 20 pF (1), 33 pF (1)
RCC_OSC_OUTpin 6Connected to: Signal 71% · not connected 29%
  • Crystal on 43% · 8 MHz (3)
  • Capacitor to GND on 43% · 18 pF (2), 33 pF (1)
NRSTpin 7Connected to: A connector 29%
  • Pull-up to 3.3V on 71% · 10 kΩ (3), 4.7 kΩ (1), 5.1 kΩ (1)
  • Capacitor to GND on 43% · 100 nF (3)
VSSApin 8Connected to: GND 100%
VDDApin 9Connected to: 3.3V 57% · a signal 43%
  • Decoupling capacitor on 86% · 100 nF (9), 1 µF (2), 4.7 µF (2)
PB1pin 19Connected to: Not connected 83% · a signal 17%
PB2pin 20Connected to: Not connected 83% · a signal 17%
VSSpin 23, 35, 47Connected to: GND 100%
PA8pin 29Connected to: Signal 67% · not connected 33%
  • Series resistor on 33% · 330 Ω (1), 47 kΩ (1)
PA9pin 30Connected to: Not connected 67% · a signal 33%
PB5pin 41Connected to: Not connected 67% · a signal 33%
PB6pin 42Connected to: Signal 100%
  • Pull-up to 3.3V on 33% · 4.7 kΩ (2)
PB7pin 43Connected to: Signal 100%
  • Pull-up to 3.3V on 33% · 4.7 kΩ (2)
BOOT0pin 44Connected to: Signal 83% · GND 17%
  • Resistor to GND on 83% · 10 kΩ (2), 4.7 kΩ (1), 5.1 kΩ (1)
I2C1_SDApin 46Connected to: Not connected 67% · a signal 33%

24 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Hx4k pmod by rschlaikjer, PoE Ambient Sensor by newAM, Picoballoon by kajusK and EmbedMatrix by MAHESH-THILAK-K.

The STM32F070CBTx in open source designs

The gallery holds 7 open source boards using the STM32F070CBTx from 7 GitHub repositories; a typical one measures about 53 × 55 mm and carries around 54 components.

100% are two-layer designs, the rest use four layers or more, and 71% carry an open source license.

The most starred is Hx4k pmod by rschlaikjer.

Microcontrollers on boards using the STM32F070CBTx

STM32F070CBTx: common questions

Where can I find a STM32F070CBTx reference design?

Each of the 7 boards on this page is a real design using the STM32F070CBTx. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the STM32F070CBTx VDD pin?

The VDD pins have a decoupling capacitor on 6 of 7 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 7 open source designs using the STM32F070CBTx.

What decoupling capacitors do designs use on the STM32F070CBTx VDDA pin?

The VDDA pin has a decoupling capacitor on 6 of 7 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 7 open source designs using the STM32F070CBTx.

How is the STM32F070CBTx PC14 pin connected?

The PC14 pin is left unconnected on 6 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the STM32F070CBTx.

Which microcontrollers do boards using the STM32F070CBTx use?

Most are built on STM32 (7).

How big is a typical board using the STM32F070CBTx?

The median is 53 × 55 mm, and 100% are two-layer designs.

What is the most popular open source board using the STM32F070CBTx?

By GitHub stars, Hx4k pmod by rschlaikjer, with 11 stars.

Can I simulate one of these boards using the STM32F070CBTx before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part