Breadboard-Supply-Printed-Circuit-Board
yash-mehta13·Breadboard-Supply-Printed-Circuit-Board
About the Breadboard-Supply-Printed-Circuit-Board
Breadboard-Supply-Printed-Circuit-Board is an open source PCB design by yash-mehta13, published on GitHub. It is a 2-layer board measuring 53.5 × 33 mm, with 17 components from 13 distinct parts.
Other key parts include the LM7805_TO220 and LM317_TO-220. By type, the board carries 7 connectors, 3 capacitors, 3 resistors, 2 ICs, 1 switch and 1 diode.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
A through-hole KiCad design for a breadboard power supply: a DC barrel-jack input, an LM7805 5 V stage, an LM317 stage intended for 3.3 V, and 2.54 mm headers and screw terminals that bring power to a solderless breadboard's rails.
A through-hole KiCad design for a breadboard power supply: a DC barrel-jack input, an LM7805 5 V stage, an LM317 stage intended for 3.3 V, and 2.54 mm headers and screw terminals that bring power to a solderless breadboard's rails.
- Intended use - Gallery - What the design files confirm - Block-level description - Specifications - Major components - Tools and opening the project - Known issues and validation status - Documentation - Contributing, licence, attribution

Main components on the Breadboard-Supply-Printed-Circuit-Board
Breadboard-Supply-Printed-Circuit-Board bill of materials (BOM)
17 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM7805_TO220 | TO-220-3_Vertical | U1 |
| 1 | LM317_TO-220 | TO-220-3_Vertical | U2 |
| 2 | CONN_01X02_PIN Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J1, J2 |
| 2 | CONN_01X03_PIN Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J3, J4 |
| 1 | Barrel_Jack_Switch | BarrelJack_Horizontal | J5 |
| 2 | SCREW_TERMINAL_01X02 Screw_Terminal_01x02 | TerminalBlock_bornier-2_P5.08mm | J6, J7 |
| 1 | EG1218 | SW_EG1218 | S1 |
| 1 | LED | LED_D5.0mm | D1 |
| 1 | 10UF 10uF | C_Disc_D3.0mm_W1.6mm_P2.50mm | C1 |
| 1 | 0.1UF 0.1uF | C_Disc_D3.0mm_W1.6mm_P2.50mm | C2 |
| 1 | 1UF 1uF | C_Disc_D3.0mm_W1.6mm_P2.50mm | C3 |
| 2 | 0.33K 0.33k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2 |
| 1 | 0.56K 0.56k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R3 |
Breadboard-Supply-Printed-Circuit-Board design files
The KiCad project lives in the yash-mehta13/Breadboard-Supply-Printed-Circuit-Board repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB_01.kicad_pcb
- SchematicPCB_01.kicad_sch
- BOMdocs/bill-of-materials.csv
Breadboard-Supply-Printed-Circuit-Board: common questions
How big is the Breadboard-Supply-Printed-Circuit-Board?
The Breadboard-Supply-Printed-Circuit-Board measures 53.5 × 33 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Breadboard-Supply-Printed-Circuit-Board?
17 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Breadboard-Supply-Printed-Circuit-Board design files?
From the yash-mehta13/Breadboard-Supply-Printed-Circuit-Board repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Breadboard-Supply-Printed-Circuit-Board design in my own project?
The repository has no license, so all rights stay with yash-mehta13. Use it as a reference, and ask the author before reusing the design.
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979