STM32F103C8-BreakOut-Board

ymhtwe·STM32F103C8-BreakOut-Board-PCB·STM32F103C8T6_BreakOut_Board/STM32F103C8T6_BreakOut_Board.kicad_pcb

STM32F103C8-BreakOut-Board layout, top view — open source STM32 board by ymhtwe

About the STM32F103C8-BreakOut-Board

STM32F103C8-BreakOut-Board is an open source STM32 PCB design by ymhtwe, published on GitHub. It is a 2-layer board measuring 53.2 × 38.4 mm, with 30 components from 17 distinct parts.

Its main chip is the STM32F103C8T6, from the STM32 family. Other key parts include the AMS1117-3.3. By type, the board carries 13 capacitors, 6 connectors, 5 resistors, 2 ICs, 1 crystal and 1 switch.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

This repository contains the design files for a breakout board for the STM32F103C8T6 microcontroller in a 48-pin LQFP package. The breakout board provides easy access to all the pins of the microcontroller, as well as a USB-to-serial converter for programming and debugging.

This repository contains the design files for a breakout board for the STM32F103C8T6 microcontroller in a 48-pin LQFP package. The breakout board provides easy access to all the pins of the microcontroller, as well as a USB-to-serial converter for programming and debugging.

Features Compact breakout board for the STM32F103C8T6 microcontroller All pins of the microcontroller are accessible via headers Onboard 3.3V voltage regulator and decoupling capacitors USB-to-serial converter for programming and debugging Bootloader mode for easy firmware updates Getting started To get started with the…

Main components on the STM32F103C8-BreakOut-Board

STM32F103C8-BreakOut-Board bill of materials (BOM)

30 components, 17 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM32F103C8T6
U1
1
AMS1117-3.3
U2
1
16 MHz
Y1
1
USB_B_Micro
J1
3
Conn_01x04_Pin
J2, J3, J5
2
Conn_01x14_Pin
J4, J6
1
SW_SPDT
SW1
1
RED
D1
1
1220R
FB1
5
100n
C1, C3, C4, C5, C10
1
10u
C6
1
10n
C7
2
1u
C8, C9
2
10p
C11, C12
2
22u
C13, C14
1
10K
R1
4
1K5
R2, R3, R4, R5

STM32F103C8-BreakOut-Board design files

The KiCad project lives in the ymhtwe/STM32F103C8-BreakOut-Board-PCB repository on GitHub; these links point at the commit this page was built from.

STM32F103C8-BreakOut-Board: common questions

What microcontroller does the STM32F103C8-BreakOut-Board use?

The STM32F103C8-BreakOut-Board is built around the STM32F103C8T6, from the STM32 family.

How big is the STM32F103C8-BreakOut-Board?

The STM32F103C8-BreakOut-Board measures 53.2 × 38.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the STM32F103C8-BreakOut-Board?

30 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the STM32F103C8-BreakOut-Board design files?

From the ymhtwe/STM32F103C8-BreakOut-Board-PCB repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the STM32F103C8-BreakOut-Board design in my own project?

The repository has no license, so all rights stay with ymhtwe. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the STM32F103C8-BreakOut-Board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards