Glorious yoda
Yoda-Flash·glorious-yoda
About the Glorious yoda PCB
Glorious yoda is an open source RP2040/RP2350 PCB design by Yoda-Flash, published on GitHub. It is a 4-layer board measuring 100 × 50.5 mm, with 116 components from 9 distinct parts.
Its main chip is the XIAO-RP2040-SMD, from the RP2040/RP2350 family. Other key parts include the BMI323. By type, the board carries 52 capacitors, 50 LEDs, 6 resistors, 4 diodes, 2 ICs and 2 switches.
From the project
A glorious Yoda PCB with customizable LEDs that change patterns and color based on tilt and movement! Made for Hack Club Fallout's PCB Sprint.
Main components on the Glorious yoda
Glorious yoda bill of materials (BOM)
116 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-RP2040-SMD | XIAO-RP2040-SMD | U1 |
| 1 | BMI323 | BMI323_BOS | U2 |
| 2 | 1825910-6 | SW_1825910-6-4 | SW1, SW2 |
| 50 | SK9822-EC20 | SK9822EC20 | LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8 +42 |
| 4 | 1N5819 | D_SOD-123F | D1, D2, D3, D4 |
| 50 | 10UF 10uF | C_0402_1005Metric | C1, C2, C3, C4, C5, C6, C7, C8 +42 |
| 2 | 0.1UF 0.1uF | C_0402_1005Metric | C51, C52 |
| 4 | 500Ω | R_0402_1005Metric | R1, R3, R4, R5 |
| 2 | 10kΩ | R_0603_1608Metric | R6, R7 |
Glorious yoda design files
The KiCad project lives in the Yoda-Flash/glorious-yoda repository on GitHub; these links point at the commit this page was built from.
- Layoutglorious-yoda.kicad_pcb
- Schematicglorious-yoda.kicad_sch
- BOMbom.csv
Glorious yoda: common questions
What microcontroller does the Glorious yoda use?
The Glorious yoda is built around the XIAO-RP2040-SMD, from the RP2040/RP2350 family.
How big is the Glorious yoda PCB?
The Glorious yoda measures 100 × 50.5 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Glorious yoda?
116 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Glorious yoda design files?
From the Yoda-Flash/glorious-yoda repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Glorious yoda design in my own project?
The repository has no license, so all rights stay with Yoda-Flash. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Glorious yoda without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k