Controller

yonathan-star·orbitscore·hardware/controller/controller.kicad_pcb

Controller PCB layout, top view — open source RP2040/RP2350 board by yonathan-star

About the Controller PCB

Controller is an open source RP2040/RP2350 PCB design by yonathan-star, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 24 components from 20 distinct parts.

Its main chip is the Raspberry Pi Pico RP2040, from the RP2040/RP2350 family. Other key parts include the 74HC14N. By type, the board carries 6 switches, 5 connectors, 5 capacitors, 4 resistors, 2 ICs and 2 diodes.

It belongs with the audio designs in this gallery.

From the project

OrbitScore: optical rhythm-disc percussion sequencer — Half Life Music Week

A tabletop percussion sequencer that reads interchangeable perforated rhythm discs. One disc stores sixteen steps across four tracks: kick, snare, hi-hat, and tom. Turn the disc by hand to scan the pattern; a Raspberry Pi Pico then loops it at an independent electronic tempo.

Six optical channels read four data tracks, a clock track, and an index marker. Separate controller, reader, and emitter boards connect the optical scanner to the Pico. A MAX98357A amplifier drives a speaker. Two knobs set tempo and gain; four track mutes control the arrangement.

Controller, from the project README
From the project README

Main components on the Controller

Controller bill of materials (BOM)

24 components, 20 distinct parts.

QtyPartRefs
1
Raspberry Pi Pico RP2040
U1
1
74HC14N
U2
1
OPTICAL READER
J1
1
IR EMITTER BAR
J2
1
MAX98357A cable
J3
1
TEMPO 10k linear pot
J4
1
VOLUME 10k linear pot
J5
1
MUTE KICK
SW1
1
MUTE SNARE
SW2
1
MUTE HAT
SW3
1
MUTE TOM
SW4
1
SCAN
SW5
1
PLAY
SW6
2
GREEN LED
D1, D2
2
100nF
C1, C2
2
10nF
C3, C4
1
470uF 10V
C5
1
100k
R1
1
10k
R2
2
1k
R3, R4

Controller design files

The KiCad project lives in the yonathan-star/orbitscore repository on GitHub; these links point at the commit this page was built from.

Controller: common questions

What microcontroller does the Controller use?

The Controller is built around the Raspberry Pi Pico RP2040, from the RP2040/RP2350 family.

How big is the Controller PCB?

The Controller measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Controller?

24 components, from 20 distinct parts. The full bill of materials is listed on this page.

Where can I download the Controller design files?

From the yonathan-star/orbitscore repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Controller design in my own project?

The repository has no license, so all rights stay with yonathan-star. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Controller without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in orbitscore

Similar boards