Usbc-5v to-3v3-ldo
YORROY123·usbc-5v-to-3v3-ldo·kicad/usbc-ldo.kicad_sch

About the Usbc-5v to-3v3-ldo PCB
Usbc-5v to-3v3-ldo is an open source PCB design by YORROY123, published on GitHub under the MIT license. It is a board, with 12 components from 11 distinct parts.
Other key parts include the AMS1117-3.3. By type, the board carries 3 diodes, 3 capacitors, 3 resistors, 1 IC, 1 connector and 1 LED.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
USB-C 5V → 3.3V LDO breakout, designed end-to-end by an AI agent. Gerbers + BOM + a Python-generated KiCad schematic. DRC/ERC clean — never manufactured.
A small two-layer board: USB-C power input, reverse/ESD protection, an AMS1117-3.3 linear regulator, and a power indicator LED.
It was designed end to end by an AI agent (Claude Code) driving EasyEDA Pro through the community easyeda-agent connector — schematic, placement, routing, copper pours and manufacturing output. The same circuit was then rebuilt as a KiCad schematic, generated from Python, as a cross-check.
Main components on the Usbc-5v to-3v3-ldo
Usbc-5v to-3v3-ldo bill of materials (BOM)
12 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U1 |
| 1 | USB-C | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | GRN | LED_0603_1608Metric | LED1 |
| 1 | SS34 | D_SMA | D1 |
| 1 | USBLC6-2P6 | SOT-23-6 | D2 |
| 1 | SMAJ5.0A | D_SMA | D3 |
| 1 | 100nF | C_0402_1005Metric | C1 |
| 1 | 10uF | C_0805_2012Metric | C2 |
| 1 | 22uF | C_0805_2012Metric | C3 |
| 2 | 5.1k | R_0402_1005Metric | R1, R2 |
| 1 | 1k | R_0402_1005Metric | R3 |
Usbc-5v to-3v3-ldo design files
The KiCad project lives in the YORROY123/usbc-5v-to-3v3-ldo repository on GitHub; these links point at the commit this page was built from.
- Schematickicad/usbc-ldo.kicad_sch
Usbc-5v to-3v3-ldo: common questions
How many components are on the Usbc-5v to-3v3-ldo?
12 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the Usbc-5v to-3v3-ldo design files?
From the YORROY123/usbc-5v-to-3v3-ldo repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the Usbc-5v to-3v3-ldo design in my own project?
Yes, under the terms of its MIT license, which YORROY123 chose for the repository.
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979