Business card keyboard device
yskoht·business-card-keyboard-device·pcb/business-card-keyboard/business-card-keyboard.kicad_pcb
About the Business card keyboard device PCB
Business card keyboard device is an open source AVR/Arduino PCB design by yskoht, published on GitHub under the MIT license. It is a 2-layer board measuring 91 × 55 mm, with 37 components from 22 distinct parts.
Its main chip is the ATMEGA32U4-AU, from the AVR/Arduino family. By type, the board carries 10 diodes, 10 resistors, 5 switches, 5 capacitors, 3 connectors and 1 IC.
It belongs with the keyboards designs in this gallery.
From the project
Business card sized keyboard
This software is released under the MIT License, see LICENSE.

Main components on the Business card keyboard device
Business card keyboard device bill of materials (BOM)
37 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATMEGA32U4-AU | ATmega32U4_no_silk | U3 |
| 1 | Crystal_GND24 | Crystal_SMD_3225-4pin_3.2x2.5mm_HandSoldering | Y1 |
| 1 | USB_C16PIN | USB-C-COM-15111 | J2 |
| 1 | ICSP | Conn_02x03_no_silk | J3 |
| 1 | MJ-4PP-9 | MJ-4PP-9_no_silk | J4 |
| 1 | Polyfuse | C_0603_HandSoldering | F1 |
| 1 | SW_Push | TVAF17-WFC-R | SW1 |
| 4 | SW_Push | CPG135001S30_1.00u_PCB_no_silk | SW11, SW12, SW21, SW22 |
| 1 | Red | LED_1206_HandSoldering | LED1 |
| 1 | Yellow | LED_0805_HandSoldering | D1 |
| 1 | Green | LED_0805_HandSoldering | D3 |
| 4 | D | D_1206 | D11, D12, D21, D22 |
| 4 | SK6812MINI | SK6812MINI_no_silk | D31, D32, D33, D34 |
| 1 | 0.1uF | C_0603_HandSoldering | C1 |
| 2 | 22pF | C_0603_HandSoldering | C2, C4 |
| 2 | 1uF | C_0603_HandSoldering | C5, C6 |
| 1 | 10k | R_1206_HandSoldering | R2 |
| 2 | 330 | R_1206_HandSoldering | R4, R6 |
| 2 | 22 | R_1206_HandSoldering | R5, R7 |
| 1 | 1k | R_1206_HandSoldering | R11 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 5.1k | R_0805_HandSoldering | R31, R32 |
| 2 | 4.7k | R_1206_HandSoldering | R41, R42 |
Business card keyboard device design files
The KiCad project lives in the yskoht/business-card-keyboard-device repository on GitHub; these links point at the commit this page was built from.
Business card keyboard device: common questions
What microcontroller does the Business card keyboard device use?
The Business card keyboard device is built around the ATMEGA32U4-AU, from the AVR/Arduino family.
How big is the Business card keyboard device PCB?
The Business card keyboard device measures 91 × 55 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Business card keyboard device?
37 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the Business card keyboard device design files?
From the yskoht/business-card-keyboard-device repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Business card keyboard device design in my own project?
Yes, under the terms of its MIT license, which yskoht chose for the repository.
Can I test firmware for the Business card keyboard device without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k