XPS:OutputConnector
About the XPS:OutputConnector PCB
XPS:OutputConnector is an open source PCB design by yu2924, published on GitHub under the CC0-1.0 license. It is a 2-layer board measuring 35 × 62 mm, with 6 components from 6 distinct parts.
By type, the board carries 4 connectors and 2 switches.
It belongs with the audio, power & battery and test & measurement designs in this gallery.
From the project
preamplifier & power distributor for instruments
- XPS - 1. 概要 - 2. ツールとマテリアル - 3. 回路の略解 - 3-1. 主電源 (XPS:PS-AC, XPS:PS-DC) - 3-2. バッファアンプ (XPS:Channel) - 3-3. 給電回路 (XPS:Channel:XPower) - 3-4. コントローラ (XPS:Channel:Controller) とファームウェア - 4. 筐体と組み立て - 補遺 - Appendix 1. 電気楽器の外側から給電する仕組み - Appendix 2. レギュレータの損失のシミュレーション - Appendix 3. 平衡ドライバの素子感度 - Appendix 4. フリーソフトでCMYKデータを出力する手順
XPSはDTM用途を想定した、電気ギターなどの電気楽器をオーディオ機器の平衡ライン入力に接続するためのフロントエンドです。ハイインピーダンスのバッファアンプと、アクティブサーキットのための給電回路 (Appendix 1) を備えます。
XPS:OutputConnector bill of materials (BOM)
6 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ACON1 | JST-XH-B3B-XH-A-1x03-P2.50mm-Vertical | J1 |
| 1 | ACON2 | JST-XH-B3B-XH-A-1x03-P2.50mm-Vertical | J2 |
| 1 | AOUT1 | Amphenol-ACJS-MHDR | J3 |
| 1 | AOUT2 | Amphenol-ACJS-MHDR | J4 |
| 1 | GNDLIFT1 | FUJISOKU-AS1D-5M-10-Z | SW1 |
| 1 | GNDLIFT2 | FUJISOKU-AS1D-5M-10-Z | SW2 |
XPS:OutputConnector design files
The KiCad project lives in the yu2924/XPS repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/OutputConnector.kicad_pcb
- Schematicpcb/OutputConnector.kicad_sch
XPS:OutputConnector: common questions
How big is the XPS:OutputConnector PCB?
The XPS:OutputConnector measures 35 × 62 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the XPS:OutputConnector?
6 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the XPS:OutputConnector design files?
From the yu2924/XPS repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the XPS:OutputConnector design in my own project?
Yes, under the terms of its CC0-1.0 license, which yu2924 chose for the repository.
More boards in XPS
XPS:Channel
90 × 52 mm65 parts2LCC0-1.03
XPS:PS-DC
50 × 97 mm41 parts2LCC0-1.03
XPS:Channel:XPower
40.6 × 20.3 mm30 parts2LCC0-1.03
AVR/ArduinoXPS:Channel:Controller
40.6 × 30.5 mm20 parts2LCC0-1.03
XPS:Channel:ControlPanel
42 × 34 mm16 parts2LCC0-1.03
XPS:PS-AC
85 × 97 mm10 parts2LCC0-1.03
Similar boards
StackLink
gusmanb
52.3 × 10.5 mm5 parts2LGPL-3.05.0k
AnalyzerBoxPCB fork
52.7 × 47.9 mm54 parts4LGPL-3.05.0k
LevelShifter
28.3 × 39.8 mm21 parts2LGPL-3.05.0k
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2k