RL7023-USB

yuta2k·RL7023-USB·kicad/RL7023-USB.kicad_pcb

RL7023-USB PCB layout, top view — open source board by yuta2k

About the RL7023-USB PCB

RL7023-USB is an open source PCB design by yuta2k, published on GitHub under the MIT license. It is a 4-layer board measuring 50 × 25 mm, with 26 components from 20 distinct parts.

Other key parts include the USBLC6-2P6, MIC5365-3.3YD5 and FT231XS. By type, the board carries 9 resistors, 8 capacitors, 3 ICs, 3 diodes, 2 connectors and 1 inductor.

From the project

Wi-SUN モジュール「MB-RL7023-11/DSS」を USB Type-C デバイスとして扱うための基板

Wi-SUN モジュール「MB-RL7023-11/DSS」を USB Type-C デバイスとして扱うための基板です。 USB-UART コンバータ「FT231X」を採用しており、USB 経由でシリアル通信が可能です。

- kicad - KiCAD 9 プロジェクト - gerber_jlcpcb - JLCPCB 製造用ガーバ - bom - 部品表 コンデンサ・抵抗等は、定格を満たせば互換品で問題ありません (基本的に 5V を超える耐圧、1/10W 等) - images-for-doc - 本ドキュメント用の画像

経験則上、この Wi-SUN モジュールを扱うためのソフトウェア・ライブラリを再起動したときの状態管理が難しいため、シリアルポートの (再) オープン時にモジュールをリセットするようにしました。 具体的には DTR が LOW レベルとなる際、Wi-SUN モジュールの RESET ピンも瞬間的に LOW レベルとなるようにしています。 このリセットが不要な場合には、C8 を非実装としてください。

RL7023-USB, from the project README
From the project README

Main components on the RL7023-USB

RL7023-USB bill of materials (BOM)

26 components, 20 distinct parts.

QtyPartRefs
1
USBLC6-2P6
U1
1
MIC5365-3.3YD5
U2
1
FT231XS
U3
1
USB4105-GF-A
J1
1
DF12NB(3.0)-20DS-0.5V(51)
J2
1
LTST-C190TBKT
D1
1
LTST-C190EKT
D2
1
LTST-C190GKT
D3
1
BLM18PG471SN1D
FB1
1
0.1u
C1
1
10u
C2
2
1u
C3, C4
4
0.1u
C5, C6, C7, C8
1
330
R1
2
5.1k
R2, R3
1
2.4k
R4
2
27
R5, R6
1
10k
R7
1
300
R8
1
270
R9

RL7023-USB design files

The KiCad project lives in the yuta2k/RL7023-USB repository on GitHub; these links point at the commit this page was built from.

RL7023-USB: common questions

How big is the RL7023-USB PCB?

The RL7023-USB measures 50 × 25 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the RL7023-USB?

26 components, from 20 distinct parts. The full bill of materials is listed on this page.

Where can I download the RL7023-USB design files?

From the yuta2k/RL7023-USB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the RL7023-USB design in my own project?

Yes, under the terms of its MIT license, which yuta2k chose for the repository.