DragonRobot
yutotnh·DragonRobot
About the DragonRobot PCB
DragonRobot is an open source NXP PCB design by yutotnh, published on GitHub under the MIT license. It is a 2-layer board measuring 99.1 × 81.3 mm, with 27 components from 13 distinct parts.
Its main chip is the MBED-LPC1768, from the NXP family. Other key parts include the TB6643KQ,8 and L7805. By type, the board carries 12 capacitors, 7 connectors, 6 ICs and 2 fuses.
Main components on the DragonRobot
DragonRobot bill of materials (BOM)
27 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MBED-LPC1768 | DIPS2286W63P254L5370H300Q40N | IC1 |
| 4 | TB6643KQ,8 | HSIP7-P-2.54A | IC2, IC3, IC4, IC5 |
| 1 | L7805 | TO-220-3_Vertical | U1 |
| 2 | RN4020 | PinHeader_1x04_P2.54mm_Vertical | J1, J2 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_bornier-2_P5.08mm | J3 |
| 4 | Screw_Terminal_01x02 | AMASS_XT60-M_1x02_P7.20mm_Vertical | J4, J5, J6, J7 |
| 1 | Polyfuse | Fuse_Littelfuse_395Series | F1 |
| 1 | Fuse | MF505 | F2 |
| 1 | 47u | CP_Radial_D5.0mm_P2.50mm | C1 |
| 5 | 1000u | CP_Radial_D10.0mm_P5.00mm | C2, C3, C4, C5, C8 |
| 1 | 0.33u | C_Disc_D3.0mm_W1.6mm_P2.50mm | C6 |
| 1 | 0.1u | C_Disc_D3.0mm_W1.6mm_P2.50mm | C7 |
| 4 | 10u | C_Disc_D3.0mm_W1.6mm_P2.50mm | C9, C10, C11, C12 |
DragonRobot design files
The KiCad project lives in the yutotnh/DragonRobot repository on GitHub; these links point at the commit this page was built from.
- LayoutDragonRobot.kicad_pcb
DragonRobot: common questions
What microcontroller does the DragonRobot use?
The DragonRobot is built around the MBED-LPC1768, from the NXP family.
How big is the DragonRobot PCB?
The DragonRobot measures 99.1 × 81.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the DragonRobot?
27 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the DragonRobot design files?
From the yutotnh/DragonRobot repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the DragonRobot design in my own project?
Yes, under the terms of its MIT license, which yutotnh chose for the repository.
Can I test firmware for the DragonRobot without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.
Similar boards
NXP
32Bit shift register
MaltWhiskey
100 × 54 mm56 parts4LNo license763NXP
Mega-Cube-Board
MaltWhiskey
200 × 54 mm100 parts4LNo license763NXP
MCL6809
MicroCoreLabs
32.3 × 61 mm7 parts4LNo license532NXP
MCL68
MicroCoreLabs
31.6 × 84.1 mm13 parts4LNo license532NXP
MCL65+
MicroCoreLabs
72.6 × 64.1 mm6 parts2LNo license532NXP
MCLZ8
MicroCoreLabs
37.1 × 61.5 mm6 parts4LNo license532