Greek-Keyboard
ZackHarrington·PCB-Projects·Greek-Keyboard/Design-Files/Greek-Keyboard/Greek-Keyboard.kicad_pcb
About the Greek-Keyboard PCB
Greek-Keyboard is an open source AVR/Arduino PCB design by ZackHarrington, published on GitHub. It is a 2-layer board measuring 123.3 × 100.2 mm, with 151 components from 17 distinct parts.
Its main chip is the ATmega32u4, from the AVR/Arduino family. Other key parts include the SIGNATURE. By type, the board carries 43 resistors, 31 switches, 31 diodes, 9 capacitors, 2 ICs and 1 transistor.
It belongs with the keyboards designs in this gallery.
From the project
My personal PCB projects and libraries
This project was built as a request from my brother. His desire was to have a separate keyboard he could use to input Greek letters while writing papers for school. This README goes through an overview of the features, build, and considerations for next time.
The following were the requested features for this project: - A separate USB-C keyboard, with a similar look and feel to the Dell XPS-15 (his current laptop) - Contain all the Greek letters in a small form factor - If there is extra room add some other common characters (degree symbol, etc.) - Make it not require Windows language…

Main components on the Greek-Keyboard
Greek-Keyboard bill of materials (BOM)
151 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SIGNATURE | SIGNATURE | U1 |
| 1 | ATmega32u4 | TQFP44 | U2 |
| 1 | BSS316N | SOT-23-3 | Q1 |
| 1 | 8MHz±25ppm | ABLS-ABRACON | Y1 |
| 1 | USB-C | USB-4105 | J1 |
| 31 | White | 1608 | DS1, DS2, DS3, DS4, DS5, DS6, DS7, DS8 +23 |
| 1 | RED | 1608 | DS32 |
| 31 | MX-Brown | MX-1-Pole | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +23 |
| 31 | BAT54L | SOT-23-3 | D1, D2, D3, D4, D5, D6, D7, D8 +23 |
| 1 | 1uF±10% | 1608-SEM | C1 |
| 1 | 10uF±10% | 2012-SEM | C2 |
| 5 | 0.1uF±5% | 1608-SEM | C3, C4, C5, C6, C7 |
| 2 | 22pF±5% | 1608-SEM | C8, C9 |
| 38 | 470Ω±1% | 1608-SEM | R1, R2, R3, R4, R5, R6, R7, R8 +30 |
| 2 | 22Ω±1% | 1608-SEM | R31, R32 |
| 1 | 10kΩ±1% | 1608-SEM | R33 |
| 2 | 5.1kΩ±1% | 1608-SEM | R34, R35 |
Greek-Keyboard design files
The KiCad project lives in the ZackHarrington/PCB-Projects repository on GitHub; these links point at the commit this page was built from.
Greek-Keyboard: common questions
What microcontroller does the Greek-Keyboard use?
The Greek-Keyboard is built around the ATmega32u4, from the AVR/Arduino family.
How big is the Greek-Keyboard PCB?
The Greek-Keyboard measures 123.3 × 100.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Greek-Keyboard?
151 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the Greek-Keyboard design files?
From the ZackHarrington/PCB-Projects repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Greek-Keyboard design in my own project?
The repository has no license, so all rights stay with ZackHarrington. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Greek-Keyboard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in PCB-Projects
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k