Ntfod
zaibatsutel·ntfod
About the Ntfod PCB
Ntfod is an open source PCB design by zaibatsutel, published on GitHub. It is a 2-layer board measuring 80 × 49 mm, with 28 components from 18 distinct parts.
Other key parts include the AZ1117-3.3, TRS3386E and ESP-03. By type, the board carries 9 capacitors, 6 diodes, 5 connectors, 3 ICs, 3 resistors and 2 switches.
It belongs with the retro computing designs in this gallery.
From the project
New Tricks For Old Dogs: a new modem for old friends.
This is my version of the ever popular "connect your old computer to the internet using wifi" project.
This version uses (for now) the ESP-03, a slightly more broken out version of the ESP-01. It has LEDs and stuff on it to show the state of control registers and other things.
The big thing that I wanted to implement here is that the flow control pins are selectable!
Main components on the Ntfod
Ntfod bill of materials (BOM)
28 components, 18 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AZ1117-3.3 | SOT-223-3_TabPin2 | U1 |
| 1 | TRS3386E | SOIC-20W_7.5x12.8mm_Pitch1.27mm | U2 |
| 1 | ESP-03 | ESP-03 | U3 |
| 1 | CONN_01X04 | Pin_Header_Straight_1x04 | J1 |
| 1 | 5-7V DC | PINHEAD1-2 | J3 |
| 1 | Jack-DC | BARREL_JACK | J4 |
| 2 | GS3 | GS3 | J5, J6 |
| 1 | PROGRAM | SW_SPST_TL3342 | SW1 |
| 1 | RESET | SW_SPST_TL3342 | SW2 |
| 1 | TXMIT | D_1206 | D1 |
| 1 | RECV | D_1206 | D2 |
| 1 | CARRIER | D_1206 | D3 |
| 1 | DSR/CTS | D_1206 | D4 |
| 1 | DTR/RTS | D_1206 | D5 |
| 1 | POWER | D_1206 | D6 |
| 5 | 10uF | C_1206 | C1, C5, C6, C7, C9 |
| 4 | 0.1uF | C_1206 | C2, C3, C4, C8 |
| 3 | 10K | R_1206_HandSoldering | R1, R2, R3 |
Ntfod design files
The KiCad project lives in the zaibatsutel/ntfod repository on GitHub; these links point at the commit this page was built from.
- Layoutntfod.kicad_pcb
Ntfod: common questions
How big is the Ntfod PCB?
The Ntfod measures 80 × 49 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Ntfod?
28 components, from 18 distinct parts. The full bill of materials is listed on this page.
Where can I download the Ntfod design files?
From the zaibatsutel/ntfod repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Ntfod design in my own project?
The repository has no license, so all rights stay with zaibatsutel. Use it as a reference, and ask the author before reusing the design.
Similar boards
Expansion Card Retrofit
FrameworkComputer
24 × 27.3 mm5 parts2LCC-BY-4.01.1kRgb to hdmi
hoglet67
77 × 97 mm67 parts2LGPL-3.01.0kBuffer
hoglet67
53.9 × 23.2 mm13 parts2LGPL-3.01.0kX1
hoglet67
121.9 × 81.3 mm51 parts2LGPL-3.01.0kAmiga External
hoglet67
21.9 × 76.7 mm6 parts2LGPL-3.01.0kVideoslotadapter
hoglet67
152 × 57.6 mm13 parts2LGPL-3.01.0k