TP-BMP
zakqwy·TP-BMP
About the TP-BMP PCB
TP-BMP is an open source STM32 PCB design by zakqwy, published on GitHub under the CC-BY-SA-4.0 license. It is a 4-layer board measuring 24.1 × 40.1 mm, with 52 components from 25 distinct parts.
Its main chip is the STM32F103CBUx, from the STM32 family. Other key parts include the TLV70233DBV and 74LVC2T45. By type, the board carries 18 capacitors, 13 resistors, 6 ICs, 4 diodes, 2 transistors and 2 connectors.
Main components on the TP-BMP
TP-BMP bill of materials (BOM)
52 components, 25 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TLV70233DBV | ZF_SOT23-5L | U1 |
| 4 | 74LVC2T45 | ZF_IC_XSON8 | U2, U3, U4, U5 |
| 1 | STM32F103CBUx | ZF_IC_UFQFPN48 | U6 |
| 1 | DMG1024UV-7 | ZF_SMD_SOT-563 | Q1 |
| 1 | DMG1023UV-7 | ZF_SMD_SOT-563 | Q2 |
| 1 | 8 MHz | ZF_XTAL_PBRV_M | Y1 |
| 1 | FPC | ZF_CONN_FPC_8POS_52745 | P1 |
| 1 | JST GH 10-pos | ZF_CONN_JST_GH_10POS | P2 |
| 1 | Polyfuse | ZF_SMD_nonpol_1206 | F1 |
| 1 | SOLDER PAD | ZF_STRUCT_2.5x1 | W1 |
| 4 | TEST PAD | ZF_CONN_1-2_pad | W2, W3, W4, W5 |
| 1 | GREEN | ZF_SMD_NonPol_0402 | D1 |
| 1 | RED | ZF_SMD_NonPol_0402 | D2 |
| 1 | ORANGE | ZF_SMD_NonPol_0402 | D3 |
| 1 | YELLOW | ZF_SMD_NonPol_0402 | D4 |
| 2 | C | ZF_SMD_NonPol_0603 | C1, C2 |
| 14 | 100n | ZF_SMD_NonPol_0402_cap | C3, C4, C5, C6, C7, C8, C9, C10 +6 |
| 1 | 4u7 | ZF_SMD_NonPol_0603 | C14 |
| 1 | 1u | ZF_SMD_NonPol_0603 | C16 |
| 5 | 10k | ZF_SMD_NonPol_0402 | R1, R3, R4, R8, R10 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 4k7 | ZF_SMD_NonPol_0402 | R2, R9 |
| 1 | 1k5 | ZF_SMD_NonPol_0402 | R5 |
| 2 | 22 | ZF_SMD_NonPol_0402 | R6, R7 |
| 1 | 330 | ZF_RN_4iso_CTS-0804 | RN1 |
| 2 | 100 | ZF_RN_4iso_CTS-0804 | RN2, RN3 |
TP-BMP design files
The KiCad project lives in the zakqwy/TP-BMP repository on GitHub; these links point at the commit this page was built from.
- LayoutTP-BMP.kicad_pcb
TP-BMP: common questions
What microcontroller does the TP-BMP use?
The TP-BMP is built around the STM32F103CBUx, from the STM32 family.
How big is the TP-BMP PCB?
The TP-BMP measures 24.1 × 40.1 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the TP-BMP?
52 components, from 25 distinct parts. The full bill of materials is listed on this page.
Where can I download the TP-BMP design files?
From the zakqwy/TP-BMP repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the TP-BMP design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which zakqwy chose for the repository.
Can I test firmware for the TP-BMP without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k