288 cpld alpha
zambujal·CPLD-XC95288XL-replacement-for-scld-timex·Hardware/PCB/prototype/288 cpld alpha.kicad_pcb
About the 288 cpld alpha PCB
288 cpld alpha is an open source PCB design by zambujal, published on GitHub. It is a 2-layer board measuring 59.8 × 57.9 mm, with 35 components from 9 distinct parts.
Other key parts include the LM1117DT-3.3 and XCR3256-TQ144. By type, the board carries 13 capacitors, 13 resistors, 6 connectors, 2 ICs and 1 crystal.
From the project
Based on the work ok Alvaro and the museum load
A fully working CPLD replacement for the Timex SCLD — validated on real hardware.
✔ Timing fixes ✔ CMOS Z84 compatible ✔ NMOS Z80 compatible ✔ Tested on real hardware
The OE signal is hardwired to '1', which means the condition:
never produces high impedance on any output pin. This is a code bug, not a Xilinx hardware limitation.
The XC95288XL correctly implements tristate output buffers (OBUFT) when the condition actually varies — as demonstrated by the CPUCLK fix, where using CPUCLKos='0' as the condition produces true tristate behaviour.

Main components on the 288 cpld alpha
288 cpld alpha bill of materials (BOM)
35 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM1117DT-3.3 | SOT-223-3_TabPin2 | U1 |
| 1 | XCR3256-TQ144 | TQFP-144_20x20mm_P0.5mm | U2 |
| 1 | ASE-14MHz | Oscillator_SMD_EuroQuartz_XO53-4Pin_5.0x3.2mm | X2 |
| 4 | Conn_02x09_Counter_Clockwise | PinHeader_2x09_P2.54mm_Vertical | J1, J3, J4, J5 |
| 1 | Conn_01x09_Pin | PinHeader_1x09_P2.54mm_Vertical | J2 |
| 1 | JTAG-10 | IDC-Header_2x07_P2.54mm_Latch_Vertical | J6 |
| 2 | C_Small | CP_Elec_4x5.3 | C1, C2 |
| 11 | C_Small | C_0201_0603Metric | C3, C4, C5, C6, C7, C8, C9, C10 +3 |
| 13 | R | R_0402_1005Metric | R1, R2, R3, R4, R25, R26, R27, R28 +5 |
288 cpld alpha design files
The KiCad project lives in the zambujal/CPLD-XC95288XL-replacement-for-scld-timex repository on GitHub; these links point at the commit this page was built from.
288 cpld alpha: common questions
How big is the 288 cpld alpha PCB?
The 288 cpld alpha measures 59.8 × 57.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 288 cpld alpha?
35 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the 288 cpld alpha design files?
From the zambujal/CPLD-XC95288XL-replacement-for-scld-timex repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the 288 cpld alpha design in my own project?
The repository has no license, so all rights stay with zambujal. Use it as a reference, and ask the author before reusing the design.