9 open source boards using the XCR3256-TQ144

Real designs built with the XCR3256-TQ144, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

9 boardsClear filters|Most starred

How designs wire the XCR3256-TQ144

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the XCR3256-TQ144 connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pins have a decoupling capacitor on 7 of 7 designs, most often 100 nF.
  • The O1 pin has a pull-up to 3.3V on 7 of 7 designs, most often 10 kΩ.
  • The N14 pin has a series resistor on 6 of 7 designs, most often 1 kΩ.
  • The N15 pin has a series resistor on 6 of 7 designs, most often 1 kΩ.
GNDpin 3, 17, 33, 52, 57, 59, 64, 85, 105, 124, 129, 135Connected to: GND 86%
J13pin 9Connected to: Not connected 86%
PORT_ENpin 13Connected to: GND 86%
L3pin 14Connected to: Not connected 86%
L4pin 15Connected to: Not connected 86%
L11pin 16Connected to: Not connected 86%
L13pin 18Connected to: Not connected 86%
L14pin 19Connected to: Not connected 86%
N2pin 21Connected to: Not connected 100%
N3pin 22Connected to: Not connected 100%
N4pin 23Connected to: Not connected 100%
VCCpin 24, 50, 51, 58, 73, 76, 95, 115, 123, 130, 144Connected to: 3.3V 87%
  • Decoupling capacitor on 100% · 100 nF (96)
N11pin 25Connected to: Not connected 100%
N13pin 26Connected to: Not connected 100%
N14pin 27Connected to: Signal 100%
  • Series resistor on 86% · 1 kΩ (6)
N15pin 28Connected to: Signal 100%
  • Series resistor on 86% · 1 kΩ (6)
P2pin 29Connected to: Not connected 86%
P3pin 30Connected to: Not connected 86%
P13pin 34Connected to: Not connected 86%
P14pin 35Connected to: Not connected 86%
P15pin 36Connected to: Not connected 86%
O15pin 37Connected to: Not connected 86%
O13pin 38Connected to: Not connected 86%
O12pin 39Connected to: Not connected 86%
O4pin 40Connected to: Not connected 86%
O3pin 41Connected to: Not connected 86%
O2pin 42Connected to: MCF5213-LQFP100 86%, a connector 29%
  • Pull-up to 3.3V on 86% · 10 kΩ (6)
O1pin 43Connected to: MCF5213-LQFP100 86%, a connector 43%
  • Pull-up to 3.3V on 100% · 10 kΩ (6)
O0pin 44Connected to: MCF5213-LQFP100 86%, a connector 29%
  • Pull-up to 3.3V on 86% · 10 kΩ (6)
F1pin 55Connected to: Not connected 86%
F2pin 56Connected to: Not connected 100%
F4pin 60Connected to: Not connected 86%
F11pin 61Connected to: Not connected 86%
F12pin 62Connected to: Not connected 86%
F13pin 63Connected to: Not connected 86%
F15pin 65Connected to: Not connected 86%
H0pin 66Connected to: Not connected 86%
H1pin 67Connected to: Not connected 86%
H2pin 68Connected to: Not connected 86%
H3pin 69Connected to: Not connected 100%

83 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Kicad color schemes by pointhi, Coldfire by claynicholson, 288 cpld alpha by zambujal and Prueba kicad-2 by alvaro-salazar.

The XCR3256-TQ144 in open source designs

The gallery holds 9 open source boards using the XCR3256-TQ144 from 8 GitHub repositories; a typical one measures about 157.5 × 91.4 mm and carries around 157 components.

86% use four copper layers or more, and 33% carry an open source license.

The most starred is Kicad color schemes by pointhi.

Parts used alongside the XCR3256-TQ144

XCR3256-TQ144: common questions

Where can I find a XCR3256-TQ144 reference design?

Each of the 9 boards on this page is a real design using the XCR3256-TQ144. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the XCR3256-TQ144 VCC pin?

The VCC pins have a decoupling capacitor on 7 of 7 designs, most often 100 nF. Counted from the KiCad layouts of 7 open source designs using the XCR3256-TQ144.

What pull-up resistor is used on the XCR3256-TQ144 O1 pin?

The O1 pin has a pull-up to 3.3V on 7 of 7 designs, most often 10 kΩ. Counted from the KiCad layouts of 7 open source designs using the XCR3256-TQ144.

What resistor goes on the XCR3256-TQ144 N14 pin?

The N14 pin has a series resistor on 6 of 7 designs, most often 1 kΩ. Counted from the KiCad layouts of 7 open source designs using the XCR3256-TQ144.

What parts are used alongside the XCR3256-TQ144?

The 74AHC1G14, 74HC125, MAX202, MCF5213-LQFP100 and PCA82C251 appear in the most repositories here.

How big is a typical board using the XCR3256-TQ144?

The median is 157.5 × 91.4 mm, and 14% are two-layer designs.

What is the most popular open source board using the XCR3256-TQ144?

By GitHub stars, Kicad color schemes by pointhi, with 716 stars.

Can I simulate one of these boards using the XCR3256-TQ144 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part