288 cpld beta.
zambujal·CPLD-XC95288XL-replacement-for-scld-timex·Hardware/PCB/Beta/288 cpld beta..kicad_pcb
About the 288 cpld beta. PCB
288 cpld beta. is an open source PCB design by zambujal, published on GitHub. It is a 4-layer board measuring 37.2 × 37.3 mm, with 32 components from 10 distinct parts.
Other key parts include the LM1117DT-3.3, XCR3256-TQ144 and SN74LVC1G125DBV. By type, the board carries 14 capacitors, 12 resistors, 3 ICs and 1 crystal.
From the project
Based on the work ok Alvaro and the museum load
A fully working CPLD replacement for the Timex SCLD — validated on real hardware.
✔ Timing fixes ✔ CMOS Z84 compatible ✔ NMOS Z80 compatible ✔ Tested on real hardware
The OE signal is hardwired to '1', which means the condition:
never produces high impedance on any output pin. This is a code bug, not a Xilinx hardware limitation.
The XC95288XL correctly implements tristate output buffers (OBUFT) when the condition actually varies — as demonstrated by the CPUCLK fix, where using CPUCLKos='0' as the condition produces true tristate behaviour.

Main components on the 288 cpld beta.
288 cpld beta. bill of materials (BOM)
32 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM1117DT-3.3 | SOT-223-3_TabPin2 | U1 |
| 1 | XCR3256-TQ144 | TQFP-144_20x20mm_P0.5mm | U2 |
| 1 | SN74LVC1G125DBV | SOT-23-5 | U3 |
| 1 | ASE-14MHz | Oscillator_SMD_EuroQuartz_XO53-4Pin_5.0x3.2mm | X2 |
| 1 | PinHeader_1x04_P1.00mm_Vertical | PinHeader_1x04_P1.00mm_Vertical | REF9 |
| 1 | PinHeader_1x02_P1.00mm_Vertical | PinHeader_1x02_P1.00mm_Vertical | REF10 |
| 2 | C_Small | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2 |
| 12 | C_Small | C_0201_0603Metric | C3, C4, C5, C6, C7, C8, C9, C9x +4 |
| 11 | R | R_0402_1005Metric | R1, R2, R25, R26, R27, R28, R29, R30 +3 |
| 1 | 330 | R_0402_1005Metric | R2pullclock |
288 cpld beta. design files
The KiCad project lives in the zambujal/CPLD-XC95288XL-replacement-for-scld-timex repository on GitHub; these links point at the commit this page was built from.
288 cpld beta.: common questions
How big is the 288 cpld beta. PCB?
The 288 cpld beta. measures 37.2 × 37.3 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the 288 cpld beta.?
32 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the 288 cpld beta. design files?
From the zambujal/CPLD-XC95288XL-replacement-for-scld-timex repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the 288 cpld beta. design in my own project?
The repository has no license, so all rights stay with zambujal. Use it as a reference, and ask the author before reusing the design.