IEEE Keyboard Project
Zdawg28·IEEE-Keyboard-Project-Final·Final Keyboard PCB/IEEE Keyboard Project.kicad_pcb
About the IEEE Keyboard Project PCB
IEEE Keyboard Project is an open source Raspberry Pi PCB design by Zdawg28, published on GitHub. It is a 4-layer board measuring 188.8 × 165.5 mm, with 177 components from 18 distinct parts.
Its main chip is the RP2354B, from the Raspberry Pi family. Other key parts include the NCP1117-3.3_SOT223. By type, the board carries 55 diodes, 32 capacitors, 16 resistors, 5 switches, 4 ICs and 4 connectors.
It belongs with the keyboards designs in this gallery.
Main components on the IEEE Keyboard Project
IEEE Keyboard Project bill of materials (BOM)
177 components, 18 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | RP2354B | QFN-80-1EP_10x10mm_P0.4mm_EP3.4x3.4mm | U1, U2 |
| 2 | NCP1117-3.3_SOT223 | SOT-223-3_TabPin2 | U3, U5 |
| 1 | ABM8-272-T3 | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y2 |
| 2 | ABM8-272-T3 | XTAL_ABM8-272-T3 | Y5, Y6 |
| 2 | Conn_01x04_Socket | JST_EH_S4B-EH_1x04_P2.50mm_Horizontal | J1, J2 |
| 2 | USB_C_Plug_USB2.0 | TE_2340901-1 | P3, P4 |
| 56 | MX_SW_HS | SW_Cherry_MX_1.00u_PCB | MX1, MX2, MX3, MX4, MX5, MX6, MX7, MX8 +48 |
| 4 | SW_Push | SW_Push_1P1T_NO_Vertical_Wuerth_434133025816 | SW1, SW2, SW3, SW4 |
| 1 | SW_Nidec_CAS-120A1 | Nidec_Copal_CAS-120A | SW5 |
| 55 | D_Small | D_01005_0402Metric | D1, D2, D3, D4, D5, D6, D7, D8 +47 |
| 2 | 3.3u | L_Coilcraft_LPS3314 | L3, L4 |
| 5 | 10u | C_0805_2012Metric | C2, C6, C19, C34, C35 |
| 4 | 15p | C_0402_1005Metric | C3, C4, C5, C20 |
| 16 | 100n | C_0402_1005Metric | C8, C11, C12, C13, C14, C15, C16, C17 +8 |
| 7 | 4.7u | C_0402_1005Metric | C10, C26, C27, C36, C37, C38, C39 |
| 4 | 27 | R_0402_1005Metric | R1, R2, R13, R14 |
| 10 | 1k | R_0402_1005Metric | R3, R4, R6, R7, R8, R9, R10, R12 +2 |
| 2 | 33 | R_0402_1005Metric | R5, R11 |
IEEE Keyboard Project design files
The KiCad project lives in the Zdawg28/IEEE-Keyboard-Project-Final repository on GitHub; these links point at the commit this page was built from.
IEEE Keyboard Project: common questions
What microcontroller does the IEEE Keyboard Project use?
The IEEE Keyboard Project is built around the RP2354B, from the Raspberry Pi family.
How big is the IEEE Keyboard Project PCB?
The IEEE Keyboard Project measures 188.8 × 165.5 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the IEEE Keyboard Project?
177 components, from 18 distinct parts. The full bill of materials is listed on this page.
Where can I download the IEEE Keyboard Project design files?
From the Zdawg28/IEEE-Keyboard-Project-Final repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the IEEE Keyboard Project design in my own project?
The repository has no license, so all rights stay with Zdawg28. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the IEEE Keyboard Project without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.
More boards in IEEE-Keyboard-Project-Final
Similar boards
Raspberry Pi
Open source rover
nasa-jpl
220 × 178 mm144 parts2LApache-2.09.7kRaspberry Pi
Iot
dotnet
56 × 65 mm24 parts2LMIT2.4kRaspberry Pi
SPIRIT
SPIRIT-org
82 × 155 mm130 parts6LCERN-OHL-S-2.01.3kRaspberry Pi
CM5RevEng
schlae
55 × 40 mm417 parts10LNo license1.0kRaspberry Pi
Haxo hw
cardonabits
102.4 × 211.3 mm38 parts2LCustom license673Raspberry Pi
Phased
Neumi
75 × 100 mm71 parts2LNo license507