Connect game
zdenekru·connect-game
About the Connect game PCB
Connect game is an open source PCB design by zdenekru, published on GitHub under the MIT license. It is a 2-layer board measuring 100 × 100 mm, with 31 components from 15 distinct parts.
Other key parts include the YAAJ_DCDC_StepDown_LM2596. By type, the board carries 13 connectors, 12 resistors, 4 capacitors, 1 IC and 1 transistor.
It belongs with the displays & leds designs in this gallery.
From the project
Connect Game
A fun, interactive electronics game based on Arduino Nano. Players must connect the correct GPIO pins using jumper wires based on instructions or clues to reveal a secret code.
The device supports two distinct gameplay modes:
Main components on the Connect game
Connect game bill of materials (BOM)
31 components, 15 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | YAAJ_DCDC_StepDown_LM2596 | YAAJ_DCDC_StepDown_LM2596 | U1 |
| 1 | BC547 | TO-92_Inline | Q1 |
| 2 | Conn_01x10_Socket | PinSocket_1x10_P2.54mm_Vertical | J1, J2 |
| 3 | Screw_Terminal_01x02 | TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J3, J15, J16 |
| 1 | Conn_01x06_Pin | PinHeader_1x06_P2.54mm_Vertical | J4 |
| 2 | Conn_01x04_Pin | PinSocket_1x04_P2.54mm_Vertical | J5, J6 |
| 1 | Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J13 |
| 1 | Conn_01x12_Socket | PinSocket_1x12_P2.54mm_Vertical | J14 |
| 1 | Conn_01x03 | PinSocket_1x03_P2.54mm_Vertical | J17 |
| 2 | Screw_Terminal_01x08 | TerminalBlock_Phoenix_PT-1,5-8-3.5-H_1x08_P3.50mm_Horizontal | J18, J19 |
| 3 | 100nF | C_Disc_D3.0mm_W1.6mm_P2.50mm | C1, C3, C4 |
| 1 | 100uF | CP_Radial_D4.0mm_P2.00mm | C2 |
| 1 | 180R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 10 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3, R4, R5, R6, R7, R8, R9 +2 |
| 1 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11 |
Connect game design files
The KiCad project lives in the zdenekru/connect-game repository on GitHub; these links point at the commit this page was built from.
- Layoutconnect-game.kicad_pcb
- Schematicconnect-game.kicad_sch
- BOMBOM.md
Connect game: common questions
How big is the Connect game PCB?
The Connect game measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Connect game?
31 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Connect game design files?
From the zdenekru/connect-game repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Connect game design in my own project?
Yes, under the terms of its MIT license, which zdenekru chose for the repository.
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k