LUXOMETER
About the LUXOMETER PCB
LUXOMETER is an open source PCB design by zen451019, published on GitHub. It is a 2-layer board measuring 70 × 65 mm, with 7 components from 7 distinct parts.
Other key parts include the RS485_TRANSCEIVER. By type, the board carries 3 capacitors and 2 ICs.
From the project
This repository contains the complete source code for the firmware for NEMO (Node for Electromechanical Monitoring & Operation), a high-performance IoT node designed for real-time monitoring of analog signals.
This repository contains the complete source code for the firmware for NEMO (Node for Electromechanical Monitoring & Operation), a high-performance IoT node designed for real-time monitoring of analog signals.
The system is optimized to capture, process, and transmit voltage and current data from sensors, making it an ideal solution for predictive maintenance, energy consumption monitoring, and industrial machinery diagnostics applications.
Main components on the LUXOMETER
LUXOMETER bill of materials (BOM)
7 components, 7 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ | ttgo_lora32 | U1 |
| 1 | RS485_TRANSCEIVER | XY-017 | U2 |
| 1 | Screw_Terminal_01x07 | TerminalBlock_Phoenix_MKDS-1,5-7-5.08_1x07_P5.08mm_Horizontal | MODBUS_OUT1 |
| 1 | SCREW_TERMINAL_2 | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | PWR_IN1 |
| 1 | 100 uF | CP_Radial_D8.0mm_P5.00mm | C3 |
| 1 | 10uF | C_Disc_D7.5mm_W5.0mm_P5.00mm | C4 |
| 1 | 100nF | C_Disc_D5.0mm_W2.5mm_P2.50mm | C5 |
LUXOMETER design files
The KiCad project lives in the zen451019/MONITOR_HARDWARE repository on GitHub; these links point at the commit this page was built from.
LUXOMETER: common questions
How big is the LUXOMETER PCB?
The LUXOMETER measures 70 × 65 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the LUXOMETER?
7 components, from 7 distinct parts. The full bill of materials is listed on this page.
Where can I download the LUXOMETER design files?
From the zen451019/MONITOR_HARDWARE repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the LUXOMETER design in my own project?
The repository has no license, so all rights stay with zen451019. Use it as a reference, and ask the author before reusing the design.
More boards in MONITOR_HARDWARE
CURRENT-SENSOR
90 × 85 mm106 parts2LNo license1
Voltage sensor S1
85 × 85 mm83 parts2LNo license1
VOLTAGE-SENSOR
90 × 85 mm62 parts2LNo license1
ESP32MASTER
90 × 85 mm44 parts2LNo license1
Monitor REV2
95 × 95 mm30 parts2LNo license1
ESP32SLAVE TEMP
90 × 85 mm22 parts2LNo license1
ESP32SLAVE PRESSURE
90 × 85 mm21 parts2LNo license1
ESP32SLAVE V-C INSOLATED
90 × 85 mm19 parts2LNo license1
ESP32SLAVE V-C NO INSOLATED
90 × 85 mm17 parts2LNo license1
MODBUS MASTER LORAWAN
95 × 50 mm8 parts2LNo license1