HardLabs

SLAVE PRESSURE

zen451019·MONITOR_HARDWARE·src/30-01-25/REV3/SLAVE_T-P/SLAVE_PRESSURE/SLAVE_PRESSURE.kicad_pcb

SLAVE PRESSURE PCB layout, top view — open source ESP32 board by zen451019

About the SLAVE PRESSURE PCB

SLAVE PRESSURE is an open source ESP32 PCB design by zen451019, published on GitHub. It is a 2-layer board measuring 90 × 85 mm, with 21 components from 14 distinct parts.

Its main chip is the ESP32-DEVKIT-V1, from the ESP32 family. Other key parts include the ADuM1201AR, ADS1015 and RS485_TRANSCEIVER. By type, the board carries 7 resistors, 4 ICs, 4 capacitors, 3 switches, 1 transistor and 1 diode.

It belongs with the iot & wireless designs in this gallery.

From the project

This repository contains the complete source code for the firmware for NEMO (Node for Electromechanical Monitoring & Operation), a high-performance IoT node designed for real-time monitoring of analog signals.

This repository contains the complete source code for the firmware for NEMO (Node for Electromechanical Monitoring & Operation), a high-performance IoT node designed for real-time monitoring of analog signals.

The system is optimized to capture, process, and transmit voltage and current data from sensors, making it an ideal solution for predictive maintenance, energy consumption monitoring, and industrial machinery diagnostics applications.

Main components on the SLAVE PRESSURE

ADuM1201ARESP32-DEVKIT-V1ADS1015RS485_TRANSCEIVER

SLAVE PRESSURE bill of materials (BOM)

21 components, 14 distinct parts.

QtyPartRefs
1
ADuM1201AR
U1
1
ESP32-DEVKIT-V1
U3
1
ADS1015
U4
1
RS485_TRANSCEIVER
U10
1
PN2222A
Q1
1
TMH_0505S
PS1
1
MINI-SPDT-SW
S1
1
SW_DIP_x04
SW1
1
SW_Push
SW2
1
LED
D7
4
100nF
C1, C2, C3, C4
2
330
R1, R51
4
1K
R3, R7, R8, R9
1
3.3k
R52

SLAVE PRESSURE design files

The KiCad project lives in the zen451019/MONITOR_HARDWARE repository on GitHub; these links point at the commit this page was built from.

SLAVE PRESSURE: common questions

What microcontroller does the SLAVE PRESSURE use?

The SLAVE PRESSURE is built around the ESP32-DEVKIT-V1, from the ESP32 family.

How big is the SLAVE PRESSURE PCB?

The SLAVE PRESSURE measures 90 × 85 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the SLAVE PRESSURE?

21 components, from 14 distinct parts. The full bill of materials is listed on this page.

Where can I download the SLAVE PRESSURE design files?

From the zen451019/MONITOR_HARDWARE repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the SLAVE PRESSURE design in my own project?

The repository has no license, so all rights stay with zen451019. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the SLAVE PRESSURE without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in MONITOR_HARDWARE

Similar boards