Monitor REV2
About the Monitor REV2 PCB
Monitor REV2 is an open source PCB design by zen451019, published on GitHub. It is a 2-layer board measuring 95 × 95 mm, with 30 components from 17 distinct parts.
Other key parts include the 74HC165, PC817 and LM358. By type, the board carries 12 resistors, 4 ICs, 4 capacitors, 2 connectors, 2 diodes and 1 switch.
It belongs with the rf & radio designs in this gallery, and the repository also holds 1 earlier revision of it.
Main components on the Monitor REV2
Monitor REV2 bill of materials (BOM)
30 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74HC165 | DIP-16_W7.62mm | U1 |
| 1 | PC817 | DIP-4_W7.62mm_Socket_LongPads | U2 |
| 1 | LM358 | DIP-8_W7.62mm_LongPads | U3 |
| 1 | ~ | XY-017 | U4 |
| 1 | Conn_01x02_Pin | PinSocket_1x02_P2.54mm_Vertical | J1 |
| 1 | Conn_01x05 | JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J2 |
| 1 | ~ | ttgo_lora32 | ESP32 |
| 1 | Conn_01x02 | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | JST_5V1 |
| 1 | Screw_Terminal_01x03 | TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_Horizontal | PLANTA1 |
| 2 | R_Potentiometer | Potentiometer_Bourns_3296W_Vertical | RV1, RV2 |
| 1 | SW_DIP_x08 | SW_DS01C-254-S-08BE | SW1 |
| 2 | 1N5819 | D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2 |
| 2 | 100uF | CP_Radial_D6.3mm_P2.50mm | C1, C4 |
| 2 | 100nF | C_Disc_D3.0mm_W1.6mm_P2.50mm | C2, C3 |
| 9 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R0, R1, R2, R3, R4, R5, R6, R7 +1 |
| 2 | 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R8, R9 |
| 1 | 1.2k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R10 |
Monitor REV2 design files
The KiCad project lives in the zen451019/MONITOR_HARDWARE repository on GitHub; these links point at the commit this page was built from.
Monitor REV2: common questions
How big is the Monitor REV2 PCB?
The Monitor REV2 measures 95 × 95 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Monitor REV2?
30 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the Monitor REV2 design files?
From the zen451019/MONITOR_HARDWARE repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Monitor REV2 design in my own project?
The repository has no license, so all rights stay with zen451019. Use it as a reference, and ask the author before reusing the design.
More boards in MONITOR_HARDWARE
CURRENT-SENSOR
90 × 85 mm106 parts2LNo license1
Voltage sensor S1
85 × 85 mm83 parts2LNo license1
VOLTAGE-SENSOR
90 × 85 mm62 parts2LNo license1
ESP32MASTER
90 × 85 mm44 parts2LNo license1
ESP32SLAVE TEMP
90 × 85 mm22 parts2LNo license1
ESP32SLAVE PRESSURE
90 × 85 mm21 parts2LNo license1
ESP32SLAVE V-C INSOLATED
90 × 85 mm19 parts2LNo license1
ESP32SLAVE V-C NO INSOLATED
90 × 85 mm17 parts2LNo license1
MODBUS MASTER LORAWAN
95 × 50 mm8 parts2LNo license1
LUXOMETER
70 × 65 mm7 parts2LNo license1
Earlier revisions in the repo: monitor
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675
Radioberry juice
65 × 56 mm87 parts2LNo license675
Radioberry preamp
65 × 56 mm137 parts2LNo license675
Hermes-Lite Small IO Expansion
softerhardware
18.4 × 12.5 mm6 parts2LNo license372
Hermes-Lite Jumper With IO
21.9 × 51.7 mm12 parts2LNo license372
Hermes-Lite PureSignal Feedback
17.1 × 15.4 mm6 parts2LNo license372