MotroDrive
ZeshuLiu·PolaMiyaHardware·电路/电机驱动/MotroDrive/MotroDrive.kicad_pcb
About the MotroDrive PCB
MotroDrive is an open source PCB design by ZeshuLiu, published on GitHub under the Custom license license. It is a 2-layer board measuring 33 × 48 mm, with 16 components from 16 distinct parts.
Other key parts include the TLV61048DBVR. By type, the board carries 4 resistors, 3 diodes, 3 capacitors, 2 connectors, 2 inductors and 1 IC.
From the project
主要采购件: - Mamiya Press 127mm 镜头(不需要调焦桶) - 宝丽来 AF5000(用于拆解吐片下巴、吐片电机和齿轮组)
Main components on the MotroDrive
MotroDrive bill of materials (BOM)
16 components, 16 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TLV61048DBVR | SOT-23-6_DBV_TEX | U1 |
| 1 | AO3400A | SOT-23 | Q1 |
| 1 | CONN_01X04_MOUNTINGPIN Conn_01x04_MountingPin | JST_PH_S4B-PH-SM4-TB_1x04-1MP_P2.00mm_Horizontal | J1 |
| 1 | CONN_01X02_MOUNTINGPIN Conn_01x02_MountingPin | JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J2 |
| 1 | SS34 | D_SMA | D2 |
| 1 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3 |
| 1 | 1N5819WS | D_SOD-323_HandSoldering | D4 |
| 1 | FerriteBead | L_0603_1608Metric | FB1 |
| 1 | 4.7UH 4.7uH | L_APV_APH1265 | L2 |
| 1 | 10UF 10uf | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1 |
| 1 | 1UF 1uf | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2 |
| 1 | 100UF 100uf | CP_Elec_6.3x7.7 | C4 |
| 1 | 330K 330k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 51K 51k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 10K 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
| 1 | 1k | R_0603_1608Metric | R5 |
MotroDrive design files
The KiCad project lives in the ZeshuLiu/PolaMiyaHardware repository on GitHub; these links point at the commit this page was built from.
MotroDrive: common questions
How big is the MotroDrive PCB?
The MotroDrive measures 33 × 48 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MotroDrive?
16 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the MotroDrive design files?
From the ZeshuLiu/PolaMiyaHardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the MotroDrive design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.