PM Controller
ZeshuLiu·PolaMiyaHardware·电路/主控器/PM_Controller/PM_Controller.kicad_pcb
About the PM Controller PCB
PM Controller is an open source STM32 PCB design by ZeshuLiu, published on GitHub under the Custom license license. It is a 4-layer board measuring 90 × 61.5 mm, with 118 components from 52 distinct parts.
Its main chip is the STM32G431RBTX, from the STM32 family. Other key parts include the AT24CS08-SSHM, AMS1117-3.3, BQ21040DBV, TPS2552DDBVR and STM32L011D4PX. By type, the board carries 41 resistors, 37 capacitors, 12 ICs, 11 connectors, 4 transistors and 4 inductors.
From the project
主要采购件: - Mamiya Press 127mm 镜头(不需要调焦桶) - 宝丽来 AF5000(用于拆解吐片下巴、吐片电机和齿轮组)
Main components on the PM Controller
PM Controller bill of materials (BOM)
118 components, 52 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | AT24CS08-SSHM | SOIC-8_3.9x4.9mm_P1.27mm | U1, U9 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U2 |
| 1 | STM32G431RBTX STM32G431RBTx | LQFP-64_10x10mm_P0.5mm | U3 |
| 1 | BQ21040DBV | SOT-23-6_Handsoldering | U5 |
| 2 | TPS2552DDBVR | DBV0006A_TEX | U6, U11 |
| 1 | STM32L011D4PX STM32L011D4Px | TSSOP-14_4.4x5mm_P0.65mm | U7 |
| 1 | ME6211C25M5 | SOT-23-5_HandSoldering | U8 |
| 1 | TMP102XXDRL TMP102xxDRL | SOT-563 | U10 |
| 1 | TLP127 | MFSOP6-4_4.4x3.6mm_P1.27mm | U12 |
| 1 | TLV61048DBVR | SOT-23-6_DBV_TEX | U13 |
| 4 | AO3400A | SOT-23 | Q2, Q3, Q5, Q6 |
| 1 | 32.768KHZ 32.768kHz | Crystal_C26-LF_D2.1mm_L6.5mm_Horizontal | Y1 |
| 1 | 24MHZ 24Mhz | Crystal_DS26_D2.0mm_L6.0mm_Horizontal | Y2 |
| 2 | CONN_01X04_SOCKET Conn_01x04_Socket | JST_PH_S4B-PH-K_1x04_P2.00mm_Horizontal | J1, J4 |
| 3 | CONN_01X04_SOCKET Conn_01x04_Socket | PinHeader_1x04_P2.54mm_Vertical | J2, J3, J9 |
| 1 | CONN_01X02_PIN Conn_01x02_Pin | SolderWire-0.5sqmm_1x02_P4.8mm_D0.9mm_OD2.3mm | J5 |
| 1 | CONN_01X02_PIN Conn_01x02_Pin | PinSocket_1x02_P2.00mm_Vertical | J6 |
| 2 | CONN_02X04_ODD_EVEN Conn_02x04_Odd_Even | PinHeader_2x04_P1.27mm_Vertical | J7, J10 |
| 1 | CONN_01X04_PIN Conn_01x04_Pin | PinHeader_1x04_P2.00mm_Vertical | J8 |
| 1 | CONN_02X06_ODD_EVEN Conn_02x06_Odd_Even | PinHeader_2x06_P1.27mm_Vertical | J11 |
Show 32 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Battery_Cell | cr1220 | BT1 |
| 1 | CONN_01X02_PIN Conn_01x02_Pin | SolderWire-0.1sqmm_1x02_P3.6mm_D0.4mm_OD1mm_Relief | FLASH1 |
| 2 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | CHG1, PW_LED1 |
| 1 | SS32 SS34 | D_SMA | D1 |
| 1 | SS32 | D_SMA_Handsoldering | D3 |
| 1 | 1N5819WS | D_SOD-323_HandSoldering | D4 |
| 1 | FerriteBead | L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | FB1 |
| 1 | 4.7UH 4.7uH | L_APV_APH0650 | L1 |
| 2 | 4.7uH | L_APV_APH0650 | L2, L3 |
| 4 | 5PF 5pf | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C25 |
| 1 | 22UF 100nf | C_0603_1608Metric | C4 |
| 4 | 22UF 22uf | CP_EIA-3528-21_Kemet-B_Pad1.50x2.35mm_HandSolder | C5, C6, C11, C38 |
| 11 | 100NF 100nf | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7, C21, C23, C26, C28, C29, C30, C31 +3 |
| 3 | 10UF 10uf | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C8, C22, C27 |
| 4 | 1UF 1uf | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C10, C32, C34, C35 |
| 1 | 47UF 22uf | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C12 |
| 2 | 47UF 47uf | CP_EIA-3528-21_Kemet-B_Pad1.50x2.35mm_HandSolder | C14, C24 |
| 4 | 22UF 22uf | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C17, C18, C19, C20 |
| 1 | 22uf | CP_EIA-3528-21_Kemet-B_HandSolder | C39 |
| 1 | 1uf | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C40 |
| 1 | 10uf | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C41 |
| 14 | 100K 100k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R8, R12, R14, R15, R23, R24 +6 |
| 1 | RPORG(1k) | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 2 | 1.5K 1.5k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R13 |
| 2 | 22K 22k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R37 |
| 5 | 100K 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R25, R26, R32, R40 |
| 6 | 10K 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7, R29, R33, R34, R35, R36 |
| 6 | 100k(NC) | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R16, R17, R18, R20, R21, R22 |
| 2 | 150K 150k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R30, R38 |
| 1 | 150k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R43 |
| 1 | 33k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R44 |
| 1 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R45 |
PM Controller design files
The KiCad project lives in the ZeshuLiu/PolaMiyaHardware repository on GitHub; these links point at the commit this page was built from.
PM Controller: common questions
What microcontroller does the PM Controller use?
The PM Controller is built around the STM32G431RBTX, from the STM32 family.
How big is the PM Controller PCB?
The PM Controller measures 90 × 61.5 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the PM Controller?
118 components, from 52 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the PM Controller design files?
From the ZeshuLiu/PolaMiyaHardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the PM Controller design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.
Can I test firmware for the PM Controller without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in PolaMiyaHardware
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k