QN001 MCU
ZhengLinLei·pcb-project-kicad·QN001_MCU/QN001_MCU.kicad_pcb
About the QN001 MCU PCB
QN001 MCU is an open source AVR/Arduino PCB design by ZhengLinLei, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 30.8 × 70 mm, with 4 components from 4 distinct parts.
Its main chip is the Arduino_Nano_v3.x, from the AVR/Arduino family. By type, the board carries 1 module, 1 transistor, 1 buzzer and 1 resistor.
From the project
Collection of Kicad pcb design
[cc-by-nc-sa]: http://creativecommons.org/licenses/by-nc-sa/4.0/ [cc-by-nc-sa-image]: https://licensebuttons.net/l/by-nc-sa/4.0/88x31.png [cc-by-nc-sa-shield]: https://img.shields.io/badge/License-CC%20BY--NC--SA%204.0-lightgrey.svg
This is a collection of Kicad projects that I have created. I am sharing them in the hope that they will be useful to others. Bom list in https://zhenglinlei.github.io/pcb-project-kicad/

Main components on the QN001 MCU
QN001 MCU bill of materials (BOM)
4 components, 4 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Arduino_Nano_v3.x | Arduino_Nano | A1 |
| 1 | NPN | TO-92_Inline | Q1 |
| 1 | Buzzer | Buzzer_15x7.5RM7.6 | BZ1 |
| 1 | 1kR | R_Axial_DIN0414_L11.9mm_D4.5mm_P20.32mm_Horizontal | R1 |
QN001 MCU design files
The KiCad project lives in the ZhengLinLei/pcb-project-kicad repository on GitHub; these links point at the commit this page was built from.
- LayoutQN001_MCU/QN001_MCU.kicad_pcb
- SchematicQN001_MCU/QN001_MCU.kicad_sch
QN001 MCU: common questions
What microcontroller does the QN001 MCU use?
The QN001 MCU is built around the Arduino_Nano_v3.x, from the AVR/Arduino family.
How big is the QN001 MCU PCB?
The QN001 MCU measures 30.8 × 70 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the QN001 MCU?
4 components, from 4 distinct parts. The full bill of materials is listed on this page.
Where can I download the QN001 MCU design files?
From the ZhengLinLei/pcb-project-kicad repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the QN001 MCU design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.
Can I test firmware for the QN001 MCU without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in pcb-project-kicad
ESP8266
Arbolito
ZhengLinLei
73 × 66 mm64 parts2LCC-BY-NC-4.00Counter
ZhengLinLei
53.3 × 68.6 mm32 parts2LCC-BY-NC-4.00ESP8266
Esp32 programmer
ZhengLinLei
67.3 × 66.5 mm29 parts2LCC-BY-NC-4.00Arbolito Tronco
ZhengLinLei
68.2 × 102.6 mm26 parts2LCC-BY-NC-4.00AVR/Arduino
Attiny85 programmer
ZhengLinLei
17.5 × 36 mm17 parts2LCC-BY-NC-4.00Arbolito Tronco 2
ZhengLinLei
68.2 × 111.1 mm14 parts2LCC-BY-NC-4.00Traffic light module
ZhengLinLei
14.8 × 34.5 mm13 parts2LCC-BY-NC-4.00Shawn PCB Business card
ZhengLinLei
86.6 × 54.7 mm12 parts2LCC-BY-NC-4.0080 KiCad
ZhengLinLei
49 × 25.8 mm11 parts2LCC-BY-NC-4.00
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k