Arbolito

ZhengLinLei·pcb-project-kicad·XmasTree/Base/Arbolito.kicad_pcb

Arbolito PCB layout, top view — open source ESP8266 board by ZhengLinLei

About the Arbolito PCB

Arbolito is an open source ESP8266 PCB design by ZhengLinLei, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 73 × 66 mm, with 64 components from 26 distinct parts.

Its main chip is the ESP-12F, from the ESP8266 family. Other key parts include the NCP115AMX120TCG, CH340C, AP63205WU and SHT31-DIS. By type, the board carries 19 resistors, 15 connectors, 12 capacitors, 5 ICs, 4 switches and 3 transistors.

From the project

Collection of Kicad pcb design

Project from https://github.com/makers-upv/maker-xmas-tree credits for @MakersUPV

Main components on the Arbolito

Arbolito bill of materials (BOM)

64 components, 26 distinct parts.

QtyPartRefs
1
NCP115AMX120TCG
U1
1
CH340C
U2
1
AP63205WU
U3
1
ESP-12F
U4
1
SHT31-DIS
U5
3
S8050
Q1, Q2, Q3
1
Battery
J1
1
Conn_01x06_Female
J2
4
Conn_01x01
J3, J4, J5, J6
8
Conn_01x01
J7, J8, J9, J10, J11, J12, J13, J14
1
TYPE-C 16PIN 2MD(073)
P1
1
Buzzer
BZ1
1
SolderJumper_2_Open
JP1
1
SW_DP3T
SW1
3
SW_Push
SW2, SW3, SW4
2
LED
D1, D2
1
SD103AW
D3
1
4.7u
L1
6
10uF
C1, C2, C3, C7, C8, C9
3
100n
C4, C11, C12
Show 6 more
QtyPartRefs
1
1uF
C5
1
100nF
C6
1
470pF
C10
2
4.7k
R1, R20
6
330
R2, R3, R13, R15, R16, R19
11
10k
R4, R5, R6, R7, R8, R9, R10, R14 +3

Arbolito design files

The KiCad project lives in the ZhengLinLei/pcb-project-kicad repository on GitHub; these links point at the commit this page was built from.

Arbolito: common questions

What microcontroller does the Arbolito use?

The Arbolito is built around the ESP-12F, from the ESP8266 family.

How big is the Arbolito PCB?

The Arbolito measures 73 × 66 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Arbolito?

64 components, from 26 distinct parts. The full bill of materials is listed on this page.

Where can I download the Arbolito design files?

From the ZhengLinLei/pcb-project-kicad repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Arbolito design in my own project?

It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.

Can I test firmware for the Arbolito without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.

More boards in pcb-project-kicad

Similar boards