HardLabs

Running-Tracker-Widget

Ziegen-EE·Running-Tracker-Widget·Running-Tracker/KiCad/PCB/Running-Tracker.kicad_pcb

Running-Tracker-Widget PCB layout, top view — open source AVR/Arduino board by Ziegen-EE
Simulate this board

About the Running-Tracker-Widget PCB

Running-Tracker-Widget is an open source AVR/Arduino PCB design by Ziegen-EE, published on GitHub under the MIT license. It is a 2-layer board measuring 91.5 × 51.5 mm, with 17 components from 13 distinct parts.

Its main chip is the DEV-11113, from the AVR/Arduino family. By type, the board carries 4 resistors, 3 modules, 3 connectors, 3 switches and 2 capacitors.

It belongs with the displays & leds, rf & radio and power & battery designs in this gallery.

From the project

Embedded system built on the Arduino Pro Mini featuring GPS-based position tracking, LCD output, and user input controls. Designed for precise pace, distance, and time measurement with efficient power management and modular hardware integration.

This project highlights hands-on skills in embedded systems, circuit design, and hardware integration, forming a complete end-to-end electrical engineering prototype.

You can view the full interactive BOM spreadsheet here: 👉 Running Tracker BOM – Google Sheets

Compatibility with other PCB manufacturers may require DRC rule adjustments.

PCB Design Notice: All PCB and Gerber files included in this repository are designed according to 3DayPCBs manufacturing specifications, including board thickness, copper weight, trace width, and drill tolerances. Users adapting the design for other…

Main components on the Running-Tracker-Widget

DEV-11113

Running-Tracker-Widget bill of materials (BOM)

17 components, 13 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
DEV-11113
Arduino_Pro_Mini_Socket
SparkFun
A1
1
746
GPS
Adafruit
M1
1
2808
Power Module
Pololu
M2
1
375-LS-00033
Conn_01x02_Socket
Bourns
J1
1
1505
Conn_01x02_Socket
Adafruit
J2
1
649-68001-406HLF
Conn_01x06_Pin
Amphenol FCI
J3
1
181
WC1602A
Adafruit
DS1
1
181
10K
RV1
3
611-KSS223GLFG
SW_Push
C&K
SW1, SW2, SW3
1
CL05A106MP5NUNC
10 uf
TAIYO YUDEN
C1
1
GRM033C71C104KE14D
.1 uf
KYOCERA AVX
C2
1
652-CR01005AFW4702GA
220
Panasonic
R1
3
652-PWR6927W1002FE
10k
KOA Speer
R2, R3, R4

Running-Tracker-Widget design files

The KiCad project lives in the Ziegen-EE/Running-Tracker-Widget repository on GitHub; these links point at the commit this page was built from.

Running-Tracker-Widget: common questions

What microcontroller does the Running-Tracker-Widget use?

The Running-Tracker-Widget is built around the DEV-11113, from the AVR/Arduino family.

How big is the Running-Tracker-Widget PCB?

The Running-Tracker-Widget measures 91.5 × 51.5 mm, has 2 copper layers and is 1.6648 mm thick.

How many components are on the Running-Tracker-Widget?

17 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Running-Tracker-Widget design files?

From the Ziegen-EE/Running-Tracker-Widget repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Running-Tracker-Widget design in my own project?

Yes, under the terms of its MIT license, which Ziegen-EE chose for the repository.

Can I test firmware for the Running-Tracker-Widget without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards