555 badge
zongr-ce·PCB_Design·KiCad/projects/555_badge/555_badge/555_badge.kicad_pcb
About the 555 badge PCB
555 badge is an open source PCB design by zongr-ce, published on GitHub under the CC0-1.0 license. It is a 2-layer board measuring 53.9 × 85.6 mm, with 15 components from 12 distinct parts.
Other key parts include the 7555. By type, the board carries 7 resistors, 2 diodes, 2 capacitors, 1 IC, 1 transistor and 1 switch.
It belongs with the wearables designs in this gallery.
Main components on the 555 badge
555 badge bill of materials (BOM)
15 components, 12 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 7555 | ICM7555-PDIP | U1 |
| 1 | 2N3904 | TO-92_Inline | Q1 |
| 1 | BS-7 MPD (Memory Protection Devices) | Battery_Holder_Coin_2032_BS-7 | BAT1 |
| 1 | EG1218 com E-Switch | Switch_Slide_11.6x4mm_EG1218 | S1 |
| 2 | RED | LED_D3.0mm | D1, D2 |
| 1 | 10uF | CP_Radial_D5.0mm_P2.50mm | C1 |
| 1 | 100uF | CP_Radial_D6.3mm_P2.50mm | C2 |
| 2 | 22k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R3 |
| 1 | 330k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4 |
| 1 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5 |
| 2 | 100 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R6, R7 |
555 badge design files
The KiCad project lives in the zongr-ce/PCB_Design repository on GitHub; these links point at the commit this page was built from.
555 badge: common questions
How big is the 555 badge PCB?
The 555 badge measures 53.9 × 85.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 555 badge?
15 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the 555 badge design files?
From the zongr-ce/PCB_Design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the 555 badge design in my own project?
Yes, under the terms of its CC0-1.0 license, which zongr-ce chose for the repository.
More boards in PCB_Design
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2kChainlinkDriverTester
scottbez1
198.1 × 95.3 mm123 parts2LApache-2.04.2k