Clock module
zongr-ce·PCB_Design·KiCad/projects/8_bit_computer/clock_module/clock_module/clock_module.kicad_pcb
About the Clock module
Clock module is an open source PCB design by zongr-ce, published on GitHub under the CC0-1.0 license. It is a 2-layer board measuring 54.5 × 74.4 mm, with 35 components from 19 distinct parts.
Other key parts include the LM555xN, SN74LS32N, SN74LS08N and SN74LS04N. By type, the board carries 12 capacitors, 8 resistors, 6 ICs, 4 switches, 2 connectors and 2 diodes.
Main components on the Clock module
Clock module bill of materials (BOM)
35 components, 19 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | LM555xN | DIP-8_W7.62mm | U1, U4, U6 |
| 1 | SN74LS32N Texas Instruments | DIP-14_W3mm | U2 |
| 1 | SN74LS08N Texas Instruments | DIP-14_W3mm | U3 |
| 1 | SN74LS04N Texas Instruments | DIP-14_W3mm | U5 |
| 1 | PJ-102A CUI Inc. | Barrel_Jack_5.5mmODx2.1mmID_PJ-102A | J1 |
| 1 | 0022232041 Molex | PinHeader_1x4_P2.54mm_Drill1.02mm | J2 |
| 1 | 1M | Potentiometer_Piher_PT-15-H01_Horizontal | RV1 |
| 2 | EG1218 E-Switch | Switch_Slide_11.6x4mm_EG1218 | S1, S2 |
| 1 | EG1218 SWITCH E-Switch | Switch_Slide_11.6x4mm_EG1218 | S3 |
| 1 | SW_Push | SW_PUSH_6mm_H5mm | SW1 |
| 1 | RED | LED_D3.0mm | D1 |
| 1 | BLUE | LED_D3.0mm | D2 |
| 1 | 10uF | CP_Radial_Tantal_D5.0mm_P2.50mm | C1 |
| 7 | 0.1uF | C_Disc_D3.8mm_W2.6mm_P2.50mm | C2, C5, C6, C8, C9, C10, C12 |
| 3 | 0.01uF | C_Disc_D3.8mm_W2.6mm_P2.50mm | C3, C7, C11 |
| 1 | 1uF | CP_Radial_Tantal_D5.0mm_P2.50mm | C4 |
| 5 | 1K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R5, R6 |
| 1 | 1M | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4 |
| 2 | 220 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7, R8 |
Clock module design files
The KiCad project lives in the zongr-ce/PCB_Design repository on GitHub; these links point at the commit this page was built from.
Clock module: common questions
How big is the Clock module?
The Clock module measures 54.5 × 74.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Clock module?
35 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Clock module design files?
From the zongr-ce/PCB_Design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Clock module design in my own project?
Yes, under the terms of its CC0-1.0 license, which zongr-ce chose for the repository.