Makerspace
zopieux·makerspace·esp32-eth-relay-hat/esp32-eth-relay-hat.kicad_pcb
About the Makerspace PCB
Makerspace is an open source PCB design by zopieux, published on GitHub. It is a 2-layer board measuring 72.8 × 21 mm, with 20 components from 17 distinct parts.
Other key parts include the MCP1415. By type, the board carries 7 resistors, 3 transistors, 3 connectors, 2 diodes, 2 capacitors and 1 IC.
It belongs with the dev boards & breakouts designs in this gallery.
Main components on the Makerspace
Makerspace bill of materials (BOM)
20 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP1415 | SOT-23-5 | U1 |
| 2 | BC846 | SOT-23_Handsoldering | Q1, Q2 |
| 1 | 2N7002L | SOT-23_Handsoldering | Q3 |
| 1 | Conn_01x08 | TerminalBlock_Phoenix_MKDS-1,5-8_1x08_P5.00mm_Horizontal | J1 |
| 1 | Conn_ESP_2 | PinSocket_1x20_P2.54mm_Vertical | J2 |
| 1 | Conn_ESP_1 | PinSocket_1x20_P2.54mm_Vertical | J3 |
| 1 | 5M | Potentiometer_Bourns_3386P_Vertical | RV1 |
| 1 | LED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | LED1 |
| 1 | MDB10S | Diode_Bridge_Diotec_ABS | D1 |
| 1 | MMSZ12T | D_SOD-123 | D2 |
| 1 | 1µF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | 10µF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2 |
| 2 | 4k7 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R6 |
| 2 | 3k3 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3 |
| 1 | 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
| 1 | 100 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 1 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7 |
Makerspace design files
The KiCad project lives in the zopieux/makerspace repository on GitHub; these links point at the commit this page was built from.
Makerspace: common questions
How big is the Makerspace PCB?
The Makerspace measures 72.8 × 21 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Makerspace?
20 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the Makerspace design files?
From the zopieux/makerspace repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Makerspace design in my own project?
The repository has no license, so all rights stay with zopieux. Use it as a reference, and ask the author before reusing the design.
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979