Yukuyuku USBasp ProgrammerV1
About the Yukuyuku USBasp ProgrammerV1 PCB
Yukuyuku USBasp ProgrammerV1 is an open source AVR/Arduino PCB design by zukki4123, published on GitHub. It is a 2-layer board measuring 30 × 20 mm, with 29 components from 16 distinct parts.
Its main chip is the ATMEGA88PA-A, from the AVR/Arduino family. By type, the board carries 13 resistors, 5 diodes, 4 capacitors, 2 connectors, 2 jumpers and 1 IC.
It belongs with the usb & debug tools designs in this gallery.
From the project
AVRのICSP書き込みができるUSBaspです。従来の物よりもよりコンパクトなのが特徴です。
Main components on the Yukuyuku USBasp ProgrammerV1
Yukuyuku USBasp ProgrammerV1 bill of materials (BOM)
29 components, 16 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATMEGA88PA-A ATmega88PA-A | TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | 12MHZ 12mHz | Crystal_HC49-4H_Vertical | Y1 |
| 1 | USB_C_RECEPTACLE_USB2.0_16P USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | CONN_02X05_ODD_EVEN Conn_02x05_Odd_Even | PinHeader_2x05_P2.54mm_Vertical | J2 |
| 1 | 350MA 350mA | Fuse_0402_1005Metric | F1 |
| 2 | JUMPER_2_OPEN Jumper_2_Open | PinHeader_1x02_P2.54mm_Vertical | JP1, JP2 |
| 3 | LED | LED_0603_1608Metric | D1, D2, D3 |
| 2 | 3.6V | D_SOD-323F | D4, D5 |
| 2 | 22PF 22pF | C_0402_1005Metric | C1, C2 |
| 1 | 4.7UF 4.7uF | C_0603_1608Metric | C3 |
| 1 | 0.1UF 0.1uF | C_0402_1005Metric | C4 |
| 2 | 5.1K 5.1k | R_0603_1608Metric | R1, R2 |
| 2 | 100R | R_0603_1608Metric | R3, R4 |
| 5 | 1k | R_0603_1608Metric | R5, R6, R10, R11, R13 |
| 3 | 220R | R_0603_1608Metric | R7, R8, R9 |
| 1 | 10K 10k | R_0603_1608Metric | R12 |
Yukuyuku USBasp ProgrammerV1 design files
The KiCad project lives in the zukki4123/yukuyuku_USBasp_ProgrammerV1 repository on GitHub; these links point at the commit this page was built from.
Yukuyuku USBasp ProgrammerV1: common questions
What microcontroller does the Yukuyuku USBasp ProgrammerV1 use?
The Yukuyuku USBasp ProgrammerV1 is built around the ATMEGA88PA-A, from the AVR/Arduino family.
How big is the Yukuyuku USBasp ProgrammerV1 PCB?
The Yukuyuku USBasp ProgrammerV1 measures 30 × 20 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Yukuyuku USBasp ProgrammerV1?
29 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Yukuyuku USBasp ProgrammerV1 design files?
From the zukki4123/yukuyuku_USBasp_ProgrammerV1 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Yukuyuku USBasp ProgrammerV1 design in my own project?
The repository has no license, so all rights stay with zukki4123. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Yukuyuku USBasp ProgrammerV1 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/ArduinoRedox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0k
AVR/ArduinoModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoV4
30 × 50 mm38 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoDiscipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k
AVR/ArduinoMegadesk
gcormier
41.7 × 32.2 mm23 parts2LGPL-3.0818
AVR/ArduinoEasyduino Atmega Nano
Hanqaqa
43.4 × 18 mm30 parts4LCERN-OHL-P-2.0746