Rcc programmer

0x007E·rcc_programmer·pcb/RCC_prog.kicad_pcb

Rcc programmer PCB layout, top view — open source board by 0x007E

About the Rcc programmer PCB

Rcc programmer is an open source PCB design by 0x007E, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 25.4 × 25.4 mm, with 14 components from 9 distinct parts.

Other key parts include the FT230XS. By type, the board carries 5 capacitors, 4 connectors, 2 resistors, 1 IC, 1 diode and 1 inductor.

It belongs with the usb & debug tools designs in this gallery.

From the project

Programming platform for RCC

The RCCprogrammer project is based on a pcb with an FT230XS to program the RCC (RGB LED Color Cube). It either can be programmed with the developed module or with a simple self-made UPDI converter. The deliverd software writes the defined settings with avr-dude over serialupdi` onto the ATTiny402.

There are two parts of the hardware. The pcb and the housing of the RCCprogrammer. The pcb is created with KiCAD and the housing with FreeCAD . The software is programmed with Visual Studio. All files are built with github actions so that they are ready for a production environment. The housing is…

Rcc programmer, from the project README
From the project README

Main components on the Rcc programmer

Rcc programmer bill of materials (BOM)

14 components, 9 distinct parts.

QtyPartRefs
1
FT230XS
U1
4
Conn_01x01_Pin
J1, J2, J3, J4
1
BAT43
D1
1
70Ω/100Mhz/3A
FB1
1
10u
C1
3
100n
C2, C3, C4
1
10n
C5
1
1k
R3
1
470
R4

Rcc programmer design files

The KiCad project lives in the 0x007E/rcc_programmer repository on GitHub; these links point at the commit this page was built from.

Rcc programmer: common questions

How big is the Rcc programmer PCB?

The Rcc programmer measures 25.4 × 25.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Rcc programmer?

14 components, from 9 distinct parts. The full bill of materials is listed on this page.

Where can I download the Rcc programmer design files?

From the 0x007E/rcc_programmer repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Rcc programmer design in my own project?

It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.

Similar boards