HardLabs

Synth Labs 060 Hotswap RGB

0xCB-dev·SL-060-PCB·rev1.0/pcb-hotswap/pcb-hotswap.kicad_pcb

Synth Labs 060 Hotswap RGB PCB layout, top view — open source AVR/Arduino board by 0xCB-dev
Simulate this board

About the Synth Labs 060 Hotswap RGB PCB

Synth Labs 060 Hotswap RGB is an open source AVR/Arduino PCB design by 0xCB-dev, published on GitHub under the Custom license license. It is a 2-layer board measuring 285 × 95 mm, with 176 components from 16 distinct parts.

Its main chip is the ATMEGA32U4, from the AVR/Arduino family. By type, the board carries 96 diodes, 13 capacitors, 2 resistors, 1 IC, 1 crystal and 1 connector.

It belongs with the keyboards and audio designs in this gallery.

From the project

Synth Labs 060 PCB Hardware Files

Licence | OSHWA :-------------------------:|:-------------------------: | [](https://certification.oshwa.org/de000116.html)

Synth Labs 060 Hotswap RGB, from the project README
From the project README

Main components on the Synth Labs 060 Hotswap RGB

ATMEGA32U4

Synth Labs 060 Hotswap RGB bill of materials (BOM)

176 components, 16 distinct parts.

QtyPartRefs
1
ATMEGA32U4
U1
1
16MHz
Y1
1
Conn_01x04
J2
49
MX
MX1, MX2, MX3, MX4, MX5, MX6, MX7, MX8 +41
1
MX
MX14
6
MX
MX15, MX28, MX55, MX57, MX59, MX61
2
MX
MX29, MX53
2
MX
MX41, MX42
1
MX
MX58
1
SW_Push
SW1
63
SK6812MINI-E
D1, D2, D3, D4, D5, D6, D7, D8 +55
33
BAV70
D64, D65, D66, D67, D68, D69, D70, D71 +25
2
1u
C1, C8
9
100n
C2, C3, C4, C5, C9, C10, C11, C12 +1
2
22p
C6, C7
2
10k
R3, R4

Synth Labs 060 Hotswap RGB design files

The KiCad project lives in the 0xCB-dev/SL-060-PCB repository on GitHub; these links point at the commit this page was built from.

Synth Labs 060 Hotswap RGB: common questions

What microcontroller does the Synth Labs 060 Hotswap RGB use?

The Synth Labs 060 Hotswap RGB is built around the ATMEGA32U4, from the AVR/Arduino family.

How big is the Synth Labs 060 Hotswap RGB PCB?

The Synth Labs 060 Hotswap RGB measures 285 × 95 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Synth Labs 060 Hotswap RGB?

176 components, from 16 distinct parts. The full bill of materials is listed on this page.

Where can I download the Synth Labs 060 Hotswap RGB design files?

From the 0xCB-dev/SL-060-PCB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Synth Labs 060 Hotswap RGB design in my own project?

It is published under Custom license, which limits how it may be reused; read the license before building on it.

Can I test firmware for the Synth Labs 060 Hotswap RGB without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in SL-060-PCB

Similar boards