Eyes
0Zane·E.L.B.E.R.R·hardware/eyes/eyes.kicad_pcb
About the Eyes PCB
Eyes is an open source PCB design by 0Zane, published on GitHub under the MIT license. It is a 2-layer board measuring 130 × 95 mm, with 10 components from 5 distinct parts.
By type, the board carries 7 connectors and 3 capacitors.
It belongs with the robotics & motion designs in this gallery.
From the project
Fanmade of E.LB.E.R.R. robot by LightsAreOff
Eyes bill of materials (BOM)
10 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | CONN_01X09_PIN Conn_01x09_Pin | PinHeader_1x09_P2.54mm_Vertical | J1, J2, J3, J4 |
| 1 | Barrel_Jack | BarrelJack_Horizontal | J5 |
| 2 | CONN_01X22 Conn_01x22 | Amphenol_F32Q-1A7x1-11022_1x22-1MP_P0.5mm_Horizontal | J8, J9 |
| 2 | 0.1UF 0.1uF | C_0805_2012Metric | C1, C2 |
| 1 | 100UF 100uF | CP_Radial_D8.0mm_P3.50mm | C7 |
Eyes design files
The KiCad project lives in the 0Zane/E.L.B.E.R.R repository on GitHub; these links point at the commit this page was built from.
Eyes: common questions
How big is the Eyes PCB?
The Eyes measures 130 × 95 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Eyes?
10 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Eyes design files?
From the 0Zane/E.L.B.E.R.R repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Eyes design in my own project?
Yes, under the terms of its MIT license, which 0Zane chose for the repository.
More boards in E.L.B.E.R.R
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979