EbyMeshCore

120m4n·EbyMeshCore

EbyMeshCore PCB layout, top view — open source board by 120m4n

About the EbyMeshCore PCB

EbyMeshCore is an open source PCB design by 120m4n, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 56.6 × 42.9 mm, with 15 components from 8 distinct parts.

Other key parts include the AMS1117-3.3. By type, the board carries 5 capacitors, 5 resistors, 3 transistors, 1 IC and 1 connector.

It belongs with the rf & radio and power & battery designs in this gallery.

From the project

LoRa mesh node PCB: Pro Micro nRF52840 (nice!nano clone) + Ebyte E22-900M30S / E22-900M33S (SX1262), fed from an external 5 V (max 5.5 V) supply through an AMS1117-3.3 LDO. Targeted at MeshCore firmware.

LoRa mesh node PCB: Pro Micro nRF52840 (nice!nano clone) + Ebyte E22-900M30S / E22-900M33S (SX1262), fed from an external 5 V (max 5.5 V) supply through an AMS1117-3.3 LDO. Targeted at MeshCore firmware.

MeshCore variant variants/ebytemesh/ in 120m4n/MeshCore-HJ7RMN, branch feature/ebytemesh.

- Reuses variants/promicro (faketec pinout = this PCB). - EbyteMeshBoard: battery reports 0 mV (P0.31 floats, no battery). - EbyteMeshRadioWrapper: clamps every setTxPower() to MAXLORATXPOWER. - Module selected in [ebytemeshmodule]: - E22-900M30S: LORATXPOWER=22 - E22-900M33S: LORATXPOWER=8…

Main components on the EbyMeshCore

EbyMeshCore bill of materials (BOM)

15 components, 8 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
AMS1117-3.3
U3
3
AO3400A
Q1, Q2, Q3
1
C5356059
SMA
J1
1
C2164703
100uF 16V
C1
1
4.7UF
4.7uF
C2
2
0.1UF
0.1uF
C3, C5
1
1UF
1uF
C4
5
10K
10k
R1, R2, R3, R4, R5

EbyMeshCore design files

The KiCad project lives in the 120m4n/EbyMeshCore repository on GitHub; these links point at the commit this page was built from.

EbyMeshCore: common questions

How big is the EbyMeshCore PCB?

The EbyMeshCore measures 56.6 × 42.9 mm, has 2 copper layers and is 0.41116 mm thick.

How many components are on the EbyMeshCore?

15 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the EbyMeshCore design files?

From the 120m4n/EbyMeshCore repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the EbyMeshCore design in my own project?

Yes, under the terms of its Apache-2.0 license, which 120m4n chose for the repository.

Similar boards