Enfitnix bat converter
1atabey1·enfitnix-bat-converter
About the Enfitnix bat converter PCB
Enfitnix bat converter is an open source PCB design by 1atabey1, published on GitHub. It is a 4-layer board measuring 16 × 16 mm, with 10 components from 9 distinct parts.
Other key parts include the BQ298000RUGR and EFC8811R-TF. By type, the board carries 3 resistors, 2 ICs, 2 connectors and 2 capacitors.
It belongs with the power & battery designs in this gallery.
From the project
Battery protection board that turns regular 18650 cells into ones that are compatible with the Enfitnix Navi series lights
NOTE: The current release (1.0.0) is not functional without workarounds. See issues for more info.
Bike lights by Enfitnix use the quite common 18650 form factor for their batteries. However, they require a very specific protection PCB that exposes both poles of the battery in two concentric circles on one side.
It's kinda hard to get these batteries (at least in Europe -> over 30€ for a single battery!!!), so this custom PCB offers the option of converting almost any 18650 battery into one that fits your bike light for a BOM cost of just around 1€.
Main components on the Enfitnix bat converter
Enfitnix bat converter bill of materials (BOM)
10 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BQ298000RUGR BQ298218RUGR | ADS7056IRUGR | IC1 |
| 1 | EFC8811R-TF | EFC8811RTF | IC2 |
| 1 | ~ | ENFITNIX_BAT | J1 |
| 1 | ~ | CELL_LEAD_CONN | J2 |
| 1 | 0R001 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R_SEN1 |
| 2 | 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 1 | 330R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 20R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 2K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
Enfitnix bat converter design files
The KiCad project lives in the 1atabey1/enfitnix-bat-converter repository on GitHub; these links point at the commit this page was built from.
- Layoutbms_18650.kicad_pcb
- Schematicbms_18650.kicad_sch
Enfitnix bat converter: common questions
How big is the Enfitnix bat converter PCB?
The Enfitnix bat converter measures 16 × 16 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Enfitnix bat converter?
10 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the Enfitnix bat converter design files?
From the 1atabey1/enfitnix-bat-converter repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Enfitnix bat converter design in my own project?
The repository has no license, so all rights stay with 1atabey1. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k