ESP32 P4 MIPI DSI to HDMI Converter Board
23Senna·kcci-pcb-design·hdmi-lvds-bridge/kicad/ESP32-HDMI-LVDS.kicad_pcb
About the ESP32 P4 MIPI DSI to HDMI Converter Board
ESP32 P4 MIPI DSI to HDMI Converter Board is an open source PCB design by 23Senna, published on GitHub. It is a 4-layer board measuring 65.3 × 49.1 mm, with 91 components from 24 distinct parts.
Other key parts include the SGM2212-1-8XKC3G and LT8912B_QFN64. By type, the board carries 37 resistors, 24 capacitors, 8 diodes, 4 connectors, 4 inductors and 2 ICs.
From the project
A 4-layer converter board that takes the 2-lane MIPI-DSI display output of an ESP32-P4 and drives either an HDMI monitor or an LVDS panel, using the Lontium LT8912B bridge IC.
A 4-layer converter board that takes the 2-lane MIPI-DSI display output of an ESP32-P4 and drives either an HDMI monitor or an LVDS panel, using the Lontium LT8912B bridge IC.
All high-speed pairs run over the solid inner ground planes.
- Power: an SGM2212 LDO derives 1.8 V for the LT8912B from the ESP32-P4's 3.3 V rail, and each analog/digital/PLL rail is isolated with a 220 Ω @ 100 MHz ferrite bead plus 10 µF / 0.1 µF decoupling. 5 V enters on J1 through a 1N5819 Schottky (reverse-polarity protection) and supplies the HDMI +5 V / DDC side. The decoupling capacitors sit on the bottom side…

Main components on the ESP32 P4 MIPI DSI to HDMI Converter Board
ESP32 P4 MIPI DSI to HDMI Converter Board bill of materials (BOM)
91 components, 24 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SGM2212-1-8XKC3G SGM2212-1-8XKC3G-TR | SOT-223-3_SGM2212_SNC | U1 |
| 1 | LT8912B_QFN64 | LT8912B | U2 |
| 1 | MMBT3904 | SOT-23 | Q1 |
| 1 | ABM8G-25.000MHZ-D2X-T | CRYSTAL_ABM8G_ABR | Y1 |
| 1 | CONN_02X06 Conn_02x06 | PinHeader_2x06_P2.54mm_Vertical | J1 |
| 1 | CONN_02X09 Conn_02x09 | PinHeader_2x09_P2.54mm_Vertical | J2 |
| 1 | DSI-1-1734248-5 | TE_1-1734248-5 | J3 |
| 1 | HDMI_TYPE_A | HDMI_A_Molex_208658-1001_Horizontal | J4 |
| 10 | LBSS138LT1G | SOT23_TO-236_LRC | MOSFET1, MOSFET2, MOSFET3, MOSFET4, MOSFET5, MOSFET6, MOSFET7, MOSFET8 +2 |
| 2 | RED LED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D4 |
| 3 | 1N5819HW-7-F | 1N5819HW-7-F_DIO | D2, D6, D8 |
| 3 | RCLAMP0524PATCT | DIO_RCLAMP0524PATCT | D3, D5, D7 |
| 4 | 220R@100Mhz/2.2A | L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | FB1, FB2, FB3, FB4 |
| 7 | 10uF/10V/(20%) | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C5, C8, C12, C19, C20, C22 |
| 14 | 0.1uF/10V/(10%) | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C3, C4, C6, C7, C9, C13, C15 +6 |
| 2 | 10pF/50V/(5%) | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C10, C11 |
| 1 | 2.2nF/50V/(10%) | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C14 |
| 9 | 0(1%) | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R3, R4, R5, R6, R7, R8, R9 +1 |
| 3 | 5.1K(1%) | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R12, R14 |
| 1 | 6.04K(1%) | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | 100K(1%) | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11, R13, R16, R17, R18 |
| 1 | 1M(1%) | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R15 |
| 9 | 4.7K(1%) | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R20, R21, R22, R23, R24, R25, R26, R27 +1 |
| 9 | 2K(1%) | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R30, R31, R32, R33, R34, R35, R36, R37 +1 |
ESP32 P4 MIPI DSI to HDMI Converter Board design files
The KiCad project lives in the 23Senna/kcci-pcb-design repository on GitHub; these links point at the commit this page was built from.
ESP32 P4 MIPI DSI to HDMI Converter Board: common questions
How big is the ESP32 P4 MIPI DSI to HDMI Converter Board?
The ESP32 P4 MIPI DSI to HDMI Converter Board measures 65.3 × 49.1 mm, has 4 copper layers and is 1.6062 mm thick.
How many components are on the ESP32 P4 MIPI DSI to HDMI Converter Board?
91 components, from 24 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ESP32 P4 MIPI DSI to HDMI Converter Board design files?
From the 23Senna/kcci-pcb-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ESP32 P4 MIPI DSI to HDMI Converter Board design in my own project?
The repository has no license, so all rights stay with 23Senna. Use it as a reference, and ask the author before reusing the design.